Wenbin Kuang
Pacific Northwest National Laboratory
PO Box 999
Richland, WA 99352
(509) 375-4338
Send Email
PNNL Publications
2023
- Ko S., Y. Qiao, J.L. Ramos, W. Kuang, A.C. Denny, T.J. Roosendaal, and K.L. Simmons. 2023. "Low-Velocity Impact Performances of Healed Polymer Fiber Reinforced Plastics." In Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE 2023), April 17-20, 2023, Seattle, WA. Diamond Bar, California:SAMPE North America. PNNL-SA-181114. doi:10.33599/nasampe/s.23.0309
- Ko S., Y. Qiao, T.J. Roosendaal, A.C. Denny, J.L. Ramos, W. Kuang, and K.W. Shahwan, et al. 2023. "Low-velocity repeated impact behaviors of Polymer Fiber Reinforced Plastics (PFRPs)." In Proceedings of the American Society for Composites 38th Technical Conference, September 18-20, 2023, Woburn, MA, edited by M. Maiaru, et al. Lancaster, Pennsylvania:DEStech Publications. PNNL-SA-186407. doi:10.12783/asc38/36684
- Kuang W., B.W. Arey, A. Dohnalkova, L. Kovarik, B. Mills, N.C. Menon, and R.J. Seffens, et al. 2023. "Multi-Scale Imaging of High-Pressure Hydrogen induced Damage in EPDM Rubber Using X-ray Microcomputed Tomography, Helium-Ion Microscopy and Transmission Electron Microscopy." International Journal of Hydrogen Energy 48, no. 23:8573-8587. PNNL-SA-177303. doi:10.1016/j.ijhydene.2022.12.004
- Shin Y., W. Kuang, and K.L. Simmons. 2023. "Network stability of FKM rubber compounds under hydrogen pressure." In Proceedings of the 37th International Polymer Processing Society (PPS-37), April 11-15, 2022, Fukuoka City, Japan. AIP Conference Proceedings, 2884, Paper No. 230002. Melville, New York:AIP Publishing. PNNL-SA-174227. doi:10.1063/5.0168418
2022
- Han K., S.D. Burton, E.D. Walter, Y. Shin, W. Kuang, and K.L. Simmons. 2022. "Microsized Pore Structure Determination in EPDM Rubbers Using High-Pressure Xe-129 NMR Techniques." Journal of Physical Chemistry B 126, no. 16:3135-3142. PNNL-SA-167432. doi:10.1021/acs.jpcb.1c09189
- Hao C., T. Liu, W. Liu, M. Fei, L. Shao, W. Kuang, and K.L. Simmons, et al. 2022. "Recyclable CFRPs with Extremely High Tg: Hydrothermal Recyclability in Pure Water and Upcycling of the Recyclates for New Composite Preparation." Journal of Materials Chemistry A 10, no. 29:15623-15633. PNNL-SA-172195. doi:10.1039/D2TA03161B
- Simmons K.L., L.D. Fring, W. Kuang, Y. Shin, Y. Chou, Y. Ni, and Y. Qiao, et al. 2022. Gap Analysis on the Impacts of Hydrogen Addition to the North American Natural Gas Infrastructure Polyethylene Pipelines. PNNL-33736. Richland, WA: Pacific Northwest National Laboratory. Gap Analysis on the Impacts of Hydrogen Addition to the North American Natural Gas Infrastructure Polyethylene Pipelines
2021
- Choi K., C.B. Smith, W. Kuang, N.R. Overman, X. Ma, W. Cai, and B. Carlson. 2021. Prediction of Aluminum to Steel RSW Joint Failure - CRADA 405 (Final Report). PNNL-32400. Richland, WA: Pacific Northwest National Laboratory. Prediction of Aluminum to Steel RSW Joint Failure - CRADA 405 (Final Report)
- Chong S., B.J. Riley, W. Kuang, and M.J. Olszta. 2021. "Iodine capture with mechanically robust heat-treated Ag-Al-Si-O xerogel sorbents." ACS Omega 6, no. 17:11628-11638. PNNL-SA-158388. doi:10.1021/acsomega.1c00852
- Kuang W., W.D. Bennett, T.J. Roosendaal, B.W. Arey, A. Dohanlkova, G. Petrossian, and K.L. Simmons. 2021. "In situ friction and wear behavior of rubber materials incorporating various fillers and/or a plasticizer in high-pressure hydrogen." Tribology International 153. PNNL-SA-153343. doi:10.1016/j.triboint.2020.106627
- Kulkarni S.S., K. Choi, W. Kuang, N.C. Menon, B. Mills, A. Soulami, and K.L. Simmons. 2021. "Damage evolution in polymer due to exposure to high-pressure hydrogen gas." International Journal of Hydrogen Energy 46, no. 36:19001-19022. PNNL-SA-158973. doi:10.1016/j.ijhydene.2021.03.035
- Liu T., C. Hao, L. Shao, W. Kuang, L. Cosimbescu, K.L. Simmons, and J. Zhang. 2021. "Carbon Fiber Reinforced Epoxy Vitrimer: Robust Mechanical Performance and Facile Hydrothermal Decomposition in Pure Water." Macromolecular Rapid Communications 42, no. 3:Article No. 2000458. PNNL-SA-158250. doi:10.1002/marc.202000458
- Simmons K.L., and W. Kuang. 2021. High-Pressure, Low Temperature Composite Nozzles for Long-Term H2 Dispensing - CRADA 399 (Final Report). PNNL-30887. Richland, WA: Pacific Northwest National Laboratory. High-Pressure, Low Temperature Composite Nozzles for Long-Term H2 Dispensing - CRADA 399 (Final Report)
- Simmons K.L., W. Kuang, S.D. Burton, B.W. Arey, Y. Shin, N.C. Menon, and B. Smith. 2021. "H-Mat Hydrogen Compatibility of Polymers and Elastomers." International Journal of Hydrogen Energy 46, no. 23:12300-12310. PNNL-SA-153003. doi:10.1016/j.ijhydene.2020.06.218
2020
- Kuang W., S. Lee, B. Zhao, L.S. Fifield, K.L. Simmons, J. Zhang, and T.T. Bisel, et al. 2020. Malleable Thermosets (Vitrimers) from CO2 and Plants. PNNL-30668. Richland, WA: Pacific Northwest National Laboratory. Malleable Thermosets (Vitrimers) from CO2 and Plants
- Merkel D.R., W. Kuang, D. Malhotra, G. Petrossian, L. Zhong, K.L. Simmons, and J. Zhang, et al. 2020. "Waste PET Chemical Processing to Terephthalic Amides and Their Effect on Asphalt Performance." ACS Sustainable Chemistry & Engineering 8, no. 14:5615-5625. PNNL-SA-150317. doi:10.1021/acssuschemeng.0c00036
- Riley B.J., S. Chong, W. Kuang, T. Varga, A.S. Helal, M. Galanek, and J. Li, et al. 2020. "Metal-Organic Framework-Polyacrylonitrile Composite Beads for Xenon Capture." ACS Applied Materials & Interfaces 12, no. 40:45342-45350. PNNL-SA-154134. doi:10.1021/acsami.0c13717
- Wang T., D. Ramirez Tamayo, X. Jiang, P. Kitsopoulos, W. Kuang, V. Gupta, and E.I. Barker, et al. 2020. "Effect of interfacial characteristics on magnesium to steel joint obtained using FAST." Materials & Design 192, no. 2020:108697. PNNL-SA-150237. doi:10.1016/j.matdes.2020.108697
2019
- Simmons K.L., L. Cosimbescu, J. Zhang, D.R. Merkel, and W. Kuang. 2019. Polymer and Composite Recycle and Upcycling. PNNL-29340. Richland, WA: Pacific Northwest National Laboratory. Polymer and Composite Recycle and Upcycling