Skip to Main Content U.S. Department of Energy
Energy and Environment Directorate

Publications

Applied Materials & Manufacturing Group

199 publications found:

2024

  • Burns C.A., S.J. Livers, S. Meher, A. Mahmud, D. Garcia, P. Meher, and T. Hartmann, et al. 2024. Development Results on Replacement Materials for Current Scarce or High Supply Chain Risk Materials. PNNL-36491. Richland, WA: Pacific Northwest National Laboratory. Development Results on Replacement Materials for Current Scarce or High Supply Chain Risk Materials
  • Chen Y., Z. Gao, S.A. Hoo, V. Tipnis, R. Wang, I. Mitevski, and D. Hitchcock, et al. 2024. "Sequential Dual Alignments Introduce Synergistic Effect on Hexagonal Boron Nitride Platelets for Superior Thermal Performance." Advanced Materials 36, no. 25:Art. No. 2314097. PNNL-SA-196277. doi:10.1002/adma.202314097
  • Dagle R.A., J.A. Lopez-Ruiz, N.W. Riedel, K.S. Kappagantula, D. Zhang, and C.A. Fernandez. 2024. Methane Pyrolysis for CO2-free H2 and Carbon Nanomaterials - CRADA 576 (Final Report). PNNL-36217. Richland, WA: Pacific Northwest National Laboratory. Methane Pyrolysis for CO2-free H2 and Carbon Nanomaterials - CRADA 576 (Final Report)
  • Das H., M. Reza E Rabby, S.A. Whalen, P. Upadhyay, and G.J. Grant. 2024. "Impact of backing plate and thermal boundary conditions for high-speed friction stir welding of 25-mm thick aluminum alloy 7175-T79." International Journal of Precision Engineering and Manufacturing-Green Technology. PNNL-SA-184852. doi:10.1007/s40684-024-00607-x
  • Gotthold D.W. Optically Stimulated Luminescence Data Storage - CRADA 358 (Abstract). Optically Stimulated Luminescence Data Storage - CRADA 358 (Abstract)
  • Gotthold D.W. 2024. Optically Stimulated Luminescence Data Storage - CRADA 358 (Abstract). PNNL-35394. Richland, WA: Pacific Northwest National Laboratory. Optically Stimulated Luminescence Data Storage - CRADA 358 (Abstract)
  • Gwalani B., X. Li, A.K. Nittala, W. Choi, M. Reza E Rabby, J.D. Escobar, and A.J. Bhattacharjee, et al. 2024. "Unprecedented Electrical Performance of Friction-Extruded Copper-Graphene Composites." Materials & Design 237. PNNL-SA-190528. doi:10.1016/j.matdes.2023.112555
  • Howland S., K.S. Kappagantula, H.J. Kvinge, and T.H. Emerson. 2024. "Invertible Temper Modeling using Normalizing Flows and the Effects of Structure Preserving Loss." In Proceedings of the ICML 2024 Workshop on Geometry-grounded Representation Learning and Generative Modeling, July 29, 2024 Vienna, Austria, 1-10. San Diego, California:International Conference on Machine Learning. PNNL-SA-200750.
  • Huang W., B.M. Leister, N. Shen, A. McKee, S. Mubeen, G.T. Bonheyo, and A. Rohatgi, et al. 2024. "Enhancing Corrosion Resistance of Lightweight Metal Alloys through Laser Shock Peening." Journal of Laser Applications 36, no. 4:Art. No. 042040. PNNL-SA-200120. doi:10.2351/7.0001541
  • Hubbard L.R., F.W. Hilty, A. Roy, S.M. Miley, N.R. Overman, S.E. Muller, and K.R. Fiedler, et al. 2024. "Optical Evidence of Compositional Fractioning Between Plasma-Condensed and Melt Pool Matter." Advanced Engineering Materials 26, no. 13:Art. No. 2302177. PNNL-SA-193129. doi:10.1002/adem.202302177
  • Jang G.G., J. Jun, J.K. Keum, Y. Su, M. Pole, S. Niverty, and V.V. Joshi. 2024. "Lithium nitrate salt-assisted CO2 absorption for the formation of corrosion barrier layer on AZ91D magnesium alloy." RSC Advances 14, no. 25:17696 - 17709. PNNL-SA-191974. doi:10.1039/D4RA02829E
  • Kalsar R., N.R. Overman, C. Mason, M. Song, T.J. Roosendaal, K.I. Johnson, and C. Miller, et al. 2024. "Insight into the interfacial microstructure and chemistry of hot isostatically pressed AA6061-AA6061 bonds for U-10Mo fuel cladding application." Journal of Nuclear Materials 599, no. _:Art No. 155193. PNNL-SA-186749. doi:10.1016/j.jnucmat.2024.155193
  • Kalsar R., N.R. Overman, J.T. Darsell, J.D. Escobar, L. Li, T. Wang, and X. Ma, et al. 2024. "Material flow behavior and microstructural refinement of AA6061 alloy during friction extrusion." Materials Characterization 208. PNNL-SA-189195. doi:10.1016/j.matchar.2024.113636
  • Kappagantula K.S. 2024. Characterizing Copper-Graphene Composites - CRADA 643 (Abstract). PNNL-36188. Richland, WA: Pacific Northwest National Laboratory. Characterizing Copper-Graphene Composites - CRADA 643 (Abstract)
  • Kappagantula K.S. 2024. Microstructural Characterization of Enhanced Conductivity Aluminum Alloys - CRADA 642 (Abstract). PNNL-36189. Richland, WA: Pacific Northwest National Laboratory. Microstructural Characterization of Enhanced Conductivity Aluminum Alloys - CRADA 642 (Abstract)
  • Koech P.K., D. Barpaga, D. Malhotra, A. Kumar, and A. Zwoster. 2024. Assessment of Amine-Based CO2BOLs for Direct Air Capture. PNNL-36148. Richland, WA: Pacific Northwest National Laboratory. Assessment of Amine-Based CO2BOLs for Direct Air Capture
  • Kollias L., M. Nguyen, S.I. Allec, D. Malhotra, D. Zhang, R. Rousseau, and V. Glezakou, et al. 2024. "Molecular Understanding of Nitrogen Oxide Fixation of Water-Lean Carbon Capture Solvents by Atomistic Modeling." Industrial and Engineering Chemistry Research 63, no. 28:12316-12324. PNNL-SA-186507. doi:10.1021/acs.iecr.4c01143
  • Leclaire J., D.J. Heldebrant, K. Grubel, J. Septavaux, M. Hennenbelle, E.D. Walter, and Y. Chen, et al. 2024. "Tetrameric self-assembling of water-lean solvents enables carbamate anhydride-based CO2 capture chemistry." Nature Chemistry 16, no. 7:1160 - 1168. PNNL-SA-186388. doi:10.1038/s41557-024-01495-z
  • Li L., J.D. Escobar, H. Das, S. Shukla, B.J. Schuessler, N.R. Overman, and G.J. Grant, et al. 2024. "A Dislocation Density-Based Meshfree Computational Framework for Solid Phase Processing." International Journal of Mechanical Sciences 267. PNNL-SA-189360. doi:10.1016/j.ijmecsci.2024.108962
  • Li L., M. Pole, H. Das, S. Niverty, M. Reza E Rabby, J. Fernandez dos Santos, and A. Soulami. 2024. "Meshfree Process Modeling and Experimental Validation of Friction Riveting of Aluminum 5052 to Aluminum 6061." In Light Metals 2024: Proceedings of the Light Metals Symposium held at the TMS Annual Meeting and Exhibition, March 3-7, 2024, Orlando, FL, edited by S. Wagstaff, 298–305. PNNL-SA-189749. doi:10.1007/978-3-031-50308-5_39
  • Li S., L. Yang, J. Christudasjustus, N.R. Overman, B.D. Wirth, M.L. Sushko, and P. Simonnin, et al. 2024. "Selective atomic sieving across metal/oxide interface for super-oxidation resistance." Nature Communications 15, no. _:Art. No. 6149. PNNL-SA-199966. doi:10.1038/s41467-024-50576-7
  • Li X., H. Das, M. Pole, L. Li, A. Soulami, G.J. Grant, and D.R. Herling, et al. 2024. "Exceptional Strength and Wear Resistance in an AA7075/TiB2 Composite Fabricated via Friction Consolidation." Materials & Design 242, no. _:Art. No. 113006. PNNL-SA-194466. doi:10.1016/j.matdes.2024.113006
  • Li Y., Y. Shin, W. Kuang, and K.L. Simmons. 2024. "Phase field modeling of hydrogen release in nitrile-butadiene rubber composites after high-pressure hydrogen exposure." International Journal of Hydrogen Energy 59. PNNL-SA-191921. doi:10.1016/j.ijhydene.2024.02.017
  • Nartu M., S. Meher, I.J. van Rooyen, D. Garcia, T. Wang, J. Fernandez dos Santos, and S. Tripathi, et al. 2024. Advanced Manufacturing Techniques and Compositions of High Entropy Alloys for Nuclear Applications. PNNL-36488. Richland, WA: Pacific Northwest National Laboratory. Advanced Manufacturing Techniques and Compositions of High Entropy Alloys for Nuclear Applications
  • Nepal K., C. Ugwumadu, A. Gautam, K.S. Kappagantula, and D. Drabold. 2024. "Electronic Conductivity in Metal-Graphene Composites: The Role of Disordered Carbon Structures, Defects, and Impurities." Journal of Physics: Materials 7, no. 2:Art. No. 025003. PNNL-SA-192067. doi:10.1088/2515-7639/ad261a
  • Nepal K., C. Ugwumadu, K. Subedi, K.S. Kappagantula, and D. Drabold. 2024. "Physical origin of enhanced electrical conduction in aluminum-graphene composites." Applied Physics Letters 124, no. 9:Art. No. 091902. PNNL-SA-193743. doi:10.1063/5.0195967
  • Nittala A.K., L. Furuta, J.A. Silverstein, A. Poznak, F.F. Kraft, and K.S. Kappagantula. 2024. "Electrical Property Enhancement of Non-Heat-Treatable Wrought Aluminum Alloys Using Graphene Additives." Journal of Alloys and Compounds 1003, no. _:Art. No. 175434. PNNL-SA-194099. doi:10.1016/j.jallcom.2024.175434
  • Niverty S., R. Kalsar, A. Naccarelli, T. Eden, X. Ma, N.R. Overman, and G.J. Grant, et al. 2024. "Bond Coat Assisted Enhancement in Microstructural, Mechanical and Corrosion Behavior of AZ91 Magnesium Alloy Cold Spray Coated with Aluminum Alloys." Materials & Design 238. PNNL-SA-189194.
  • Oshiro J.M., A. Fujii Yamagata, S. Sharma, R.M. Asmussen, S. Chong, B.J. Riley, and J.V. Crum, et al. 2024. "Pelletization with spark plasma sintering and characterization of metal iodides: An assessment of long-term radioiodine immobilization options." Industrial and Engineering Chemistry Research 63, no. 46:20009-20019. PNNL-SA-199799. doi:10.1021/acs.iecr.4c02320
  • Qiao Y., S. Ko, J.L. Ramos, E.K. Nickerson, A.C. Denny, G.M. Schuler, and N.L. Brown, et al. 2024. "Effects of Processing Temperature, Pressure, and Fiber Volume Fraction on Mechanical and Morphological Behaviors of Fully-recyclable Uni-directional Thermoplastic Polymer-fiber-reinforced Polymers." Composites Part C: Open Access 14, no. _:Art. No. 100497. PNNL-SA-196537. doi:10.1016/j.jcomc.2024.100497
  • Qiao Y., S. Ko, Y. Shin, and K.L. Simmons. 2024. "Exploring Failure of Adhesively-Bonded Joints with Different Void Sizes at the Same Void Volume Fraction through A Micro-scale Numerical Modeling." In ASME - Annual Aerospace Structures, Structural Dynamics, and Materials Conference (SSDM 2024), April 29 - May 1, 2024, Renton, WA, Paper No: SSDM2024-121222, V001T03A022. New York, New York:American Society of Mechanical Engineers. PNNL-SA-192432. doi:10.1115/SSDM2024-121222
  • Qiao Y., Y. Shin, J.L. Ramos, M.H. Engelhard, R.J. Seffens, D.R. Merkel, and K.L. Simmons. 2024. "Plasma Treatment on Both Adhesive Tape and Adherends for Significantly Enhanced CFRTP-related Adhesive Joints." Applied Surface Science 649. PNNL-SA-189464. doi:10.1016/j.apsusc.2023.159092
  • Qiao Y., Y. Shin, S. Ko, A. Samanta, R.J. Seffens, J.L. Ramos, and D.R. Merkel, et al. 2024. "Equivalent Properties of Interfacial Void Defects at the CFRTP-adhesive Interface and Their Detrimental Effects on the Bonding Performance of Metal-CFRTP Dissimilar Joints." In Annual Aerospace Structures, Structural Dynamics, and Materials Conference (SSDM 2024), April 29 - May 1, 2024, Renton, WA, Paper No: SSDM2024-120848, V001T03A021. New York, New York:American Society of Mechanical Engineers. PNNL-SA-191930. doi:10.1115/SSDM2024-120848
  • Riley B.J., N.L. Canfield, S. Chong, and J. Crum. 2024. "Metal-Encapsulated, Polymer-Containing Halide Salt Composites as Potential Long-Term Hosts for Radioiodine: Evaluating Halmets, Polyhalmets, and Halcermets." ACS Omega 9, no. 32:34661-34674. PNNL-SA-196206. doi:10.1021/acsomega.4c03378
  • Riley B.J., N.L. Canfield, S. Chong, J.M. Oshiro, J.L. George, C. Burns, and J.L. Helgeland. 2024. Evaluating Iodine Immobilization Technologies: Cermets, Polycermets, and Polyhalmets. PNNL-35738. Richland, WA: Pacific Northwest National Laboratory. Evaluating Iodine Immobilization Technologies: Cermets, Polycermets, and Polyhalmets
  • Riley B.J., S. Chong, and N.L. Canfield. 2024. "Synthesis of and Iodine capture with MSx (Ag2S, Bi2S3, Cu2S)-polyacrylonitrile composites." New Journal of Chemistry 48, no. 8:3352-3356. PNNL-SA-193562. doi:10.1039/D3NJ05961H
  • Roy A., L.R. Hubbard, N.R. Overman, K.R. Fiedler, D.B. Horangic, F.W. Hilty, and M.L. Taheri, et al. 2024. "Machine learning and molecular dynamics simulations aided insights into condensate ring formation in laser spot welding." Scientific Reports 14, no. _:Art. No. 30068. PNNL-SA-200209. doi:10.1038/s41598-024-79755-8
  • Simmons K.L. 2024. H2 Materials Compatibility of Low Cost, High Pressure, Polymer H2 Dispensing Hoses - CRADA 399 (Abstract). PNNL-35285. Richland, WA: Pacific Northwest National Laboratory.
  • van Rooyen I., S. Meher, P.K. Thallapally, J. Fernandez dos Santos, C.M. Silva, S. Shin, and T. Wang, et al. 2024. Nuclear Energy Critical Material Waste Minimization Enabled by AM Techniques. PNNL-36049. Richland, WA: Pacific Northwest National Laboratory. Nuclear Energy Critical Material Waste Minimization Enabled by AM Techniques
  • Wang T., Z. Lu, Q. Zhang, A. Saboo, X. Ma, T. Liu, and Z. Mahbooba, et al. 2024. "High-temperature lean Cu alloys with Cr-to-Nb atomic ratio of 2." Materials Today Communications 39, no. _:Art. No. 108884. PNNL-SA-190640. doi:10.1016/j.mtcomm.2024.108884
  • Wang T., Z. Lu, T. Liu, H. Park, D. Garcia, D. Li, and S.A. Whalen. 2024. Achieving high-ZT in Te/Se-based thermoelectric materials via volume-constrained shear-induced plastic deformation. PNNL-36668. Richland, WA: Pacific Northwest National Laboratory. Achieving high-ZT in Te/Se-based thermoelectric materials via volume-constrained shear-induced plastic deformation
  • Whalen S.A. 2024. Metal Scrap Upcycling with Shear Assisted Processing and Extrusion (ShAPE). PNNL-36520. Richland, WA: Pacific Northwest National Laboratory. Metal Scrap Upcycling with Shear Assisted Processing and Extrusion (ShAPE)
  • Whalen S.A. 2024. Non-Rare Earth Magnesium Bumper Beams - CRADA 418 (Abstract). PNNL-35288. Richland, WA: Pacific Northwest National Laboratory.
  • Whalen S.A. 2024. Process Intensification for Nanostructure Aluminum Extrusions - CRADA 411 (Abstract). PNNL-35289. Richland, WA: Pacific Northwest National Laboratory.
  • Whalen S.A., A.P. Reynolds, D.K. Chouhan, M. Komarasamy, B.S. Taysom, N.R. Overman, and N.L. Canfield, et al. 2024. Recycling of Titanium Scrap by Shear Assisted Processing and Extrusion (ShAPE). PNNL-36607. Richland, WA: Pacific Northwest National Laboratory. Recycling of Titanium Scrap by Shear Assisted Processing and Extrusion (ShAPE)
  • Whalen S.A., M. Reza E Rabby, B.K. Milligan, B.J. Schuessler, T.J. Roosendaal, and T.L. Lemmon. 2024. Wrought Aluminum-Cerium Alloys by Shear Assisted Processing and Extrusion. PNNL-36591. Richland, WA: Pacific Northwest National Laboratory. Wrought Aluminum-Cerium Alloys by Shear Assisted Processing and Extrusion
  • Yu Z., N. Kanbargi, S. Gupta, Y. Shin, Y. Qiao, C.C. Bowland, and D.R. Merkel, et al. 2024. "Acrylonitrile-butadiene-lignin thermoplastic rubber adhesive for enhanced metal-to-metal joining." Polymer Composites 45, no. 8:7178-7190. PNNL-SA-195240. doi:10.1002/pc.28258

2023

  • Ajantiwalay T., X. Ma, A. Yu, M. Pole, J.A. Silverstein, S.N. Mathaudhu, and A. Devaraj, et al. 2023. "Shear deformation of pure-Cu and Cu/Nb nano-laminates using micromechanical testing." Scripta Materialia 230. PNNL-SA-180566. doi:10.1016/j.scriptamat.2023.115403
  • Chen N., A. Devaraj, S.N. Mathaudhu, and S. Hu. 2023. "Atomic Mixing Mechanisms in Nanocrystalline Cu/Ni Composites under Continuous Shear Deformation and Thermal Annealing." Journal of Materials Research and Technology 27. PNNL-SA-177906. doi:10.1016/j.jmrt.2023.11.089
  • Chen N., S. Hu, W. Setyawan, P.V. Sushko, and S.N. Mathaudhu. 2023. "Defect Substructure Energy Landscape in Polycrystalline Al under Shear Deformation: Insights from Molecular Dynamics." Journal of Materials Research and Technology 22. PNNL-SA-174937. doi:10.1016/j.jmrt.2022.12.131
  • Das H., K.S. Kappagantula, A. Srivastava, P. Upadhyay, J. Fernandez dos Santos, and M. Reza E Rabby. 2023. "Embedded anchoring of multi-material assemblies by friction riveting process." In TMS 2023: Friction Stir Welding and Processing XII Symposium held at the TMS Annual Meeting and Exhibition, March 19-23, 2023. San Diego, CA. Minerals, Metals and Materials Series, edited by Y. Hovanksi, et al, 149–156. Cham:Springer. PNNL-SA-177374. doi:10.1007/978-3-031-22661-8_14
  • Das H., X. Li, L. Li, B.J. Schuessler, N.R. Overman, J.T. Darsell, and P. Upadhyay, et al. 2023. "An innovative and alternative approach toward gear fabrication." Journal of Manufacturing Processes 102. PNNL-SA-184447. doi:10.1016/j.jmapro.2023.07.050
  • Escobar J.D., B. Gwalani, J.A. Silverstein, T. Ajantiwalay, C. Roach, L. Bergmann, and J. Fernandez dos Santos, et al. 2023. "Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing." Materials Characterization 202. PNNL-SA-185784. doi:10.1016/j.matchar.2023.112999
  • Escobar J.D., B.S. Taysom, G.J. Grant, S.A. Whalen, A. Soulami, and L. Li. 2023. Sensing and Control During Bulk SPP. PNNL-34995. Richland, WA: Pacific Northwest National Laboratory. Sensing and Control During Bulk SPP
  • Escobar J.D., J.A. Silverstein, F. Ishrak, L. Li, A. Soulami, S. Li, and A. Yu, et al. 2023. "Microstructural evolution in shear-punch tests: A comparative study of pure Cu and Cu-Cr alloy." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 886. PNNL-SA-189843. doi:10.1016/j.msea.2023.145715
  • Frazier W.E., K. Kalia, C. Wang, K. Choi, D.P. Field, S. Hu, and A. Soulami, et al. 2023. "An Integrated Simulation of Multiple-Pass U-10Mo Alloy Hot Rolling and Static Recrystallization." Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science 54, no. 9:3461–3475. PNNL-SA-170537. doi:10.1007/s11661-023-07077-x
  • Frazier W.E., L. Li, K. Choi, Y. Fu, Z. Xu, V.V. Joshi, and A. Soulami. 2023. "Microstructure-process relationships in monolithic U-10Mo fuel foil single-pass rolling: A parametric simulation study." Journal of Nuclear Materials 576, no. 17:Art. NO. 154271. PNNL-SA-170389. doi:10.1016/j.jnucmat.2023.154271
  • Frazier W.E., N.R. Overman, B.J. Schuessler, S. Niverty, T.J. Roosendaal, S.A. Whalen, and V.V. Joshi. 2023. "Hot rolling of ZK60 magnesium alloy with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE)." Applied Sciences 13, no. 9:Art. No. 5343. PNNL-SA-159102. doi:10.3390/app13095343
  • Garcia D., H. Das, K. Sadayappan, P. Newcombe, D.R. Herling, G.J. Grant, and M. Komarasamy. 2023. "Solid Phase Processing of Mg-Al-Mn-Ca for High Strength and Ductility." In TMS Annual Meeting & Exhibition, Magnesium Technology 2023, March 19-23, 2023, San Diego, CA. The Minerals, Metals & Materials Series., edited by S. Barela, et al, 131–133. Cham:Springer. PNNL-SA-178509. doi:10.1007/978-3-031-22645-8_27
  • Howland S.A., L. Kassab, K.S. Kappagantula, H.J. Kvinge, and T.H. Emerson. 2023. "Parameters, Properties, and Process: Conditional Neural Generation of Realistic SEM Imagery Towards ML-assisted Advanced Manufacturing." Integrating Materials and Manufacturing Innovation 12, no. 1:1–10. PNNL-SA-177366. doi:10.1007/s40192-022-00287-y
  • Jiang W., L. Kovarik, M.G. Wirth, Z. Zhu, N.L. Canfield, L.M. Seymour, and L.M. Bagaasen, et al. 2023. "Ion irradiation study of lithium silicates for fusion blanket applications." Journal of Nuclear Materials 576. PNNL-SA-177177. doi:10.1016/j.jnucmat.2023.154281
  • Jun J., V.V. Joshi, A.J. Crawford, V.V. Viswanathan, D. Leonard, J. Chen, and P. Upadhyay, et al. 2023. "Galvanic Corrosion of AZ31B Joined to Dual-Phase Steel with and without Zn layer by Ultrasonic and Friction Stir Welding." Journal of Magnesium and Alloys 11, no. 2:462-479. PNNL-SA-176300. doi:10.1016/j.jma.2023.01.016
  • Kanbargi N., D. Hoskins, S. Gupta, Z. Yu, Y. Shin, Y. Qiao, and D.R. Merkel, et al. 2023. "A Renewable Lignin-based Thermoplastic Adhesive for Steel Joining." European Polymer Journal 189. PNNL-SA-187897. doi:10.1016/j.eurpolymj.2023.111981
  • Kautz E.J., M. Song, S.L. Riechers, A.M. Koziol, S.A. Briggs, K.H. Yano, and R. Prabhakaran, et al. 2023. "Influence of processing on secondary phase formation and microstructural evolution at U-10Mo alloy and Zr interlayer interfaces." Journal of Alloys and Compounds 969. PNNL-SA-182384.
  • Ko S., Y. Qiao, J.L. Ramos, W. Kuang, A.C. Denny, T.J. Roosendaal, and K.L. Simmons. 2023. "Low-Velocity Impact Performances of Healed Polymer Fiber Reinforced Plastics." In Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE 2023), April 17-20, 2023, Seattle, WA. Diamond Bar, California:SAMPE North America. PNNL-SA-181114. doi:10.33599/nasampe/s.23.0309
  • Ko S., Y. Qiao, T.J. Roosendaal, A.C. Denny, J.L. Ramos, W. Kuang, and K.W. Shahwan, et al. 2023. "Low-velocity repeated impact behaviors of Polymer Fiber Reinforced Plastics (PFRPs)." In Proceedings of the American Society for Composites 38th Technical Conference, September 18-20, 2023, Woburn, MA, edited by M. Maiaru, et al. Lancaster, Pennsylvania:DEStech Publications. PNNL-SA-186407. doi:10.12783/asc38/36684
  • Koziol A.M., K.H. Yano, A.L. Schemer-Kohrn, A. Soulami, V.V. Joshi, S.A. Briggs, and E.J. Kautz. 2023. "Microstructure and microchemistry changes at U-10Mo fuel/AA6061 cladding interfaces with varying hot isostatic pressing conditions." Journal of Nuclear Materials 585. PNNL-SA-181312. doi:10.1016/j.jnucmat.2023.154597
  • Kuang W., B.W. Arey, A. Dohnalkova, L. Kovarik, B. Mills, N.C. Menon, and R.J. Seffens, et al. 2023. "Multi-Scale Imaging of High-Pressure Hydrogen induced Damage in EPDM Rubber Using X-ray Microcomputed Tomography, Helium-Ion Microscopy and Transmission Electron Microscopy." International Journal of Hydrogen Energy 48, no. 23:8573-8587. PNNL-SA-177303. doi:10.1016/j.ijhydene.2022.12.004
  • Kulkarni S.S., K. Choi, N.C. Menon, and K.L. Simmons. 2023. "A diffusion-deformation model with damage for polymer undergoing rapid decompression failure." Journal of the Mechanics and Physics of Solids 178. PNNL-SA-179864. doi:10.1016/j.jmps.2023.105348
  • Li X., T. Wang, Y. Ni, P.A. Meyer, J.L. Ramos, and K.L. Simmons. 2023. Shear Assisted Processing and Extrusion (ShAPE) of Plastics: Recycling and Remolding. PNNL-34874. Richland, WA: Pacific Northwest National Laboratory. Shear Assisted Processing and Extrusion (ShAPE) of Plastics: Recycling and Remolding
  • Nartu M., S. Meher, I. van Rooyen, S. Tripathi, and N.L. Canfield. 2023. Feasibility Study of Advanced Manufacturing Techniques and Compositions of High Entropy Alloys. PNNL-34763. Richland, WA: Pacific Northwest National Laboratory. Feasibility Study of Advanced Manufacturing Techniques and Compositions of High Entropy Alloys
  • Nasim W., S.S. Kulkarni, A. Soulami, M. Efe, and A. Rohatgi. 2023. "Room Temperature Stamping of High-strength Aluminum for Light-weight Structural Automotive Components." Journal of Materials Engineering and Performance 33. PNNL-SA-169384. doi:10.1007/s11665-023-08810-8
  • Nasim W., T. Mungole, M. Efe, and A. Rohatgi. 2023. "Simultaneous Improvement in Strength and Ductility in 7xxx Al Through a Combination of Natural Aging and Deformation." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 884. PNNL-SA-184861. doi:10.1016/j.msea.2023.145566
  • Nittala A.K., J. Smith, B. Gwalani, J.A. Silverstein, F.F. Kraft, and K.S. Kappagantula. 2023. "Simultaneously Improved Electrical and Mechanical Performance of Hot-Extruded Bulk Scale Aluminum-Graphene Wires." Materials Science and Engineering B: Advanced Functional Solid-state Materials 293. PNNL-SA-181281. doi:10.1016/j.mseb.2023.116452
  • Niverty S., R. Kalsar, R.J. Seffens, A.D. Guzman, T.J. Roosendaal, L.E. Strange, and V.V. Joshi. 2023. "Probing corrosion using a simple and versatile in situ multimodal corrosion measurement system." Scientific Reports 13. PNNL-SA-185203. doi:10.1038/s41598-023-42249-0
  • Prabhakaran V., L.E. Strange, R. Kalsar, O.A. Marina, P. Upadhyay, and V.V. Joshi. 2023. "Investigating Electrochemical Corrosion at Mg Alloy-Steel Joint Interface Using Scanning Electrochemical Cell Impedance Microscopy (SECCIM)." Scientific Reports 13. PNNL-SA-170379. doi:10.1038/s41598-023-39961-2
  • Qiao Y., L.D. Fring, M. Pallaka, and K.L. Simmons. 2023. "A Review of the Fabrication Methods and Mechanical Behavior of Continuous Thermoplastic Polymer Fiber - Thermoplastic Polymer Matrix Composites." Polymer Composites 44, no. 2:694-733. PNNL-SA-168719. doi:10.1002/pc.27139
  • Qiao Y., S. Ko, A. Samanta, D.R. Merkel, Y. Shin, A.D. Guzman, and E.K. Nickerson, et al. 2023. "A Micro-scale Numerical Investigation of Internal and Interfacial Void Defects in Adhesive on Failure Behavior of Adhesively-Bonded Materials with Rough Surfaces." In ASME Aerospace Structures, Structural Dynamics, and Materials Conference (SSDM 2023), June 19-21, 2023, San Diego, CA, Paper No: SSDM2023-105653, V001T03A001. New York, New York:ASME. PNNL-SA-181181. doi:10.1115/SSDM2023-105653
  • Qiao Y., S. Ko, J.L. Ramos, E.K. Nickerson, A.C. Denny, K.W. Shahwan, and K.L. Simmons. 2023. "Processing Temperature Effect on Failure Behavior of Unidirectional Thermoplastic Polymer-fiber-reinforced Polymers (PFRPs)." In Proceedings of the American Society for Composites 38th Technical Conference, September 18-20, 2023, Woburn, MA, edited by M. Maiaru, et al. Lancaster, Pennsylvania:DEStech Publications. PNNL-SA-185855. doi:10.12783/asc38/36538
  • Qiao Y., Y. Shin, M. Pallaka, E.K. Nickerson, D.R. Merkel, R.J. Seffens, and A. Ortiz, et al. 2023. "Plasma Surface Modification Coupled with Thermal and Step-over Distance Effects on Significant Fracture Improvement of Adhesively-bonded Metal-CFRTP Dissimilar Materials." Composites Science and Technology 232. PNNL-SA-174296. doi:10.1016/j.compscitech.2022.109833
  • Rader K.E., A. Sabau, and A. Rohatgi. 2023. "Microstructural Refinement in Ultrasonically Modified A356 Aluminum Castings." Journal of Materials Science 58, no. 2023:17340-17361. PNNL-SA-186579. doi:10.1007/s10853-023-08999-y
  • Rader K.E., J.T. Darsell, J.L. Helgeland, N.L. Canfield, T.J. Roosendaal, E.K. Nickerson, and A.C. Denny, et al. 2023. "Improving the Mechanical Properties of Cast Aluminum Via Ultrasonication-Induced Microstructural Refinement." In Light Metals 2023: TMS Annual Meeting & Exhibition, edited by S. Broek, 422-428. PNNL-SA-177512. doi:10.1007/978-3-031-22532-1_57
  • Reddy M.J., B. Kamecki, B. Talic, E. Zanchi, F. Smeacetto, J.S. Hardy, and J. Choi, et al. 2023. "Experimental review of the performances of protective coatings for interconnects in solid oxide fuel cells." Journal of Power Sources 568. PNNL-SA-182133. doi:10.1016/j.jpowsour.2023.232831
  • Reza E Rabby M., H. Das, T. Wang, M. Komarasamy, S.A. Whalen, and G.J. Grant. 2023. "High-Speed Friction Stir Butt Welding of 25.4 mm Thick 7175-T79 Aluminum Alloy." Manufacturing Letters 38. PNNL-SA-184859. doi:10.1016/j.mfglet.2023.08.140
  • Reza E Rabby M., X. Li, G.J. Grant, S.N. Mathaudhu, and A.P. Reynolds. 2023. "Process parameters and system responses in friction extrusion." Journal of Manufacturing Processes 85. PNNL-SA-166885. doi:10.1016/j.jmapro.2022.11.027
  • Riley B.J., N.L. Canfield, M. Peterson, J.L. George, S. Chong, and J.V. Crum. 2023. Crystalline versus Glassy Nature of Iron Phosphate Waste Forms Subjected to Different Slow Cooling Curves. PNNL-34917. Richland, WA: Pacific Northwest National Laboratory. Crystalline versus Glassy Nature of Iron Phosphate Waste Forms Subjected to Different Slow Cooling Curves
  • Rohatgi A., S. Jana, and B. Kokosza. 2023. Mitigating Corrosion in Mg Sheet in Conjunction with a Sheet-Joining Method that Satisfies Structural Requirements within Sub-assemblies: CRADA 392. PNNL-35364. Richland, WA: Pacific Northwest National Laboratory. Mitigating Corrosion in Mg Sheet in Conjunction with a Sheet-Joining Method that Satisfies Structural Requirements within Sub-assemblies: CRADA 392
  • Shin Y., W. Kuang, and K.L. Simmons. 2023. "Network stability of FKM rubber compounds under hydrogen pressure." In Proceedings of the 37th International Polymer Processing Society (PPS-37), April 11-15, 2022, Fukuoka City, Japan. AIP Conference Proceedings, 2884, Paper No. 230002. Melville, New York:AIP Publishing. PNNL-SA-174227. doi:10.1063/5.0168418
  • Shin Y., Y. Qiao, Y. Ni, J.L. Ramos, E.K. Nickerson, D.R. Merkel, and K.L. Simmons. 2023. "Interfacial bond characterization of epoxy adhesives to aluminum alloy and carbon fiber-reinforced polyamide by vibrational spectroscopy." Surfaces and Interfaces 42, no. Part A:Art. No. 103346. PNNL-SA-185204. doi:10.1016/j.surfin.2023.103346
  • Song M., J. Liu, X. Ma, Q. Pang, M.J. Olszta, J.A. Silverstein, and M. Pallaka, et al. 2023. "Mass transport in a highly immiscible alloy on extended shear deformation." Journal of Materials Science Letters 134. PNNL-SA-167644. doi:10.1016/j.jmst.2022.06.029
  • Srivastava A., H. Das, D. Ramirez Tamayo, L. Li, M. Pole, B. Gwalani, and A. Soulami, et al. 2023. "Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel." International Journal of Advanced Manufacturing Technology 128, no. 7-8:2899–2911. PNNL-SA-180851. doi:10.1007/s00170-023-12111-8
  • Subedi K., K. Nepal, C. Ugwumadu, K.S. Kappagantula, and D. Drabold. 2023. "Electronic transport in copper-graphene composites." Applied Physics Letters 122, no. 3:Art. No. 031903. PNNL-SA-180138. doi:10.1063/5.0137086
  • Truong L.T., W. Choi, C.L. Wight, E.D. Coda, T.H. Emerson, K.S. Kappagantula, and H.J. Kvinge. 2023. "Differential Property Prediction: A Machine Learning Approach to Experimental Design in Advanced Manufacturing." In TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings, March 18-23, 2023, San Diego, CA, 587-595. Pittsburgh, Pennsylvania:The Minerals, Metals & Materials Society. PNNL-SA-177365. doi:10.1007/978-3-031-22524-6_52
  • van Rooyen I., A. Soulami, L. Li, M. Nartu, S. Meher, J.B. Wierschke, and J. Fernandez dos Santos, et al. 2023. Preliminary HEA Solid Phase Processing Development Report. PNNL-34986. Richland, WA: Pacific Northwest National Laboratory. Preliminary HEA Solid Phase Processing Development Report
  • van Rooyen I., C.W. Enderlin, E.J. Ponce, A. Soulami, T. Hartmann, S. Meher, and V.V. Joshi, et al. 2023. Qualification Framework Evaluations, Status Quo, and Recommendations. PNNL-35024. Richland, WA: Pacific Northwest National Laboratory. Qualification Framework Evaluations, Status Quo, and Recommendations
  • van Rooyen I., S. Meher, J. Fernandez dos Santos, M. Komarasamy, M. Nartu, J.B. Wierschke, and R. Prabhakaran, et al. 2023. Feasibility Evaluation of a Solid Phase Scalable HEA Cladding Manufacturing Route. PNNL-35499. Richland, WA: Pacific Northwest National Laboratory. Feasibility Evaluation of a Solid Phase Scalable HEA Cladding Manufacturing Route
  • van Rooyen I., T. Hartmann, V.V. Joshi, and J.B. Wierschke. 2023. Survey Corrosion Testing Methodologies for Additively Manufactured Materials – PNNL. PNNL-34756. Richland, WA: Pacific Northwest National Laboratory. Survey Corrosion Testing Methodologies for Additively Manufactured Materials – PNNL
  • Whalen S.A., B.S. Taysom, M. Reza E Rabby, N.R. Overman, and T.W. Skszek. 2023. Shear Assisted Processing and Extrusion (ShAPE) of Lightweight Automotive Components (CRADA 418). PNNL-33766. Richland, WA: Pacific Northwest National Laboratory. Shear Assisted Processing and Extrusion (ShAPE) of Lightweight Automotive Components (CRADA 418)
  • Whalen S.A., B.S. Taysom, N.R. Overman, M. Reza E Rabby, Y. Qiao, T. Richter, and T.W. Skszek, et al. 2023. "Porthole Die Extrusion of Aluminum 6063 Industrial Scrap by Shear Assisted Processing and Extrusion." Manufacturing Letters 36. PNNL-SA-179478. doi:10.1016/j.mfglet.2023.01.005
  • Whalen S.A., N.R. Overman, B.S. Taysom, M. Reza E Rabby, T.W. Skszek, and M. Diciano. 2023. "Shear Assisted Processing and Extrusion of Unhomogenized Aluminum Alloy 6063 Castings with High Iron Content." In Light Metals 2023: TMS Annual Meeting & Exhibition, edited by S. Broek, 327–332. PNNL-SA-177354. doi:10.1007/978-3-031-22532-1_45
  • Whalen S.A., N.R. Overman, B.S. Taysom, M.E. Bowden, M. Reza E Rabby, T.W. Skszek, and M. Diciano. 2023. "Effect of High Iron Content on Direct Recycling of Unhomogenized Aluminum 6063 Scrap by Shear Assisted Processing and Extrusion." Journal of Manufacturing Processes 97. PNNL-SA-181577. doi:10.1016/j.jmapro.2023.04.067

2022

  • Chen N., S. Hu, W. Setyawan, B. Gwalani, P.V. Sushko, and S. Mathaudhu. 2022. "Formation and Dissociation of Shear-induced High-energy Dislocations: Insight from Molecular Dynamics Simulations." Modelling and Simulation in Materials Science and Engineering 30, no. 2:Art. No. 025012. PNNL-SA-160865. doi:10.1088/1361-651X/ac44a5
  • Clelland D.T., D.R. Merkel, E.K. Nickerson, K.P. Brooks, V.V. Joshi, C.A. Lavender, and Z.F. Huber. 2022. "Forming Complex Nuclear Fuel Shapes in High-Loaded Silicide Surrogates." In Proceedings of the 42nd International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR 2022), October 3-5, 2022, Vienna, Austria. Lemont, Illinois:Argonne National Laboratory. PNNL-SA-178118.
  • Escobar J.D., B. Gwalani, M.J. Olszta, J.A. Silverstein, T. Ajantiwalay, N.R. Overman, and W. Fu, et al. 2022. "Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy." Journal of Alloys and Compounds 928. PNNL-SA-177343. doi:10.1016/j.jallcom.2022.167007
  • Fu W., Y. Li, S. Hu, P.V. Sushko, and S. Mathaudhu. 2022. "Effect of Loading Path on Grain Misorientation and Geometrically Necessary Dislocation Density in Polycrystalline Aluminum under Reciprocating Shear." Computational Materials Science 205. PNNL-SA-163073. doi:10.1016/j.commatsci.2022.111221
  • Fu Y., W.E. Frazier, K. Choi, L. Li, Z. Xu, V.V. Joshi, and A. Soulami. 2022. "Prediction of Grain Structure after Thermomechanical Processing of U-10Mo Alloy using Sensitivity Analysis and Machine Learning Surrogate Model." Scientific Reports 12. PNNL-SA-170738. doi:10.1038/s41598-022-14731-8
  • Gao J., Y. Zhang, J. Son, J. Bara, K.E. O'Harra, M.H. Engelhard, and D.J. Heldebrant, et al. 2022. "The interfacial compatibility between a potential CO2 separation membrane and capture solvents." Carbon Capture Science & Technology 2. PNNL-SA-168831. doi:10.1016/j.ccst.2022.100037
  • Gwalani B., Q. Pang, A. Yu, W. Fu, L. Li, M. Pole, and C.J. Roach, et al. 2022. "Extended Shear Deformation of the Immiscible Cu-Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties." ACS Omega 7, no. 16:13721-13736. PNNL-SA-169151. doi:10.1021/acsomega.1c07368
  • Han K., S.D. Burton, E.D. Walter, Y. Shin, W. Kuang, and K.L. Simmons. 2022. "Microsized Pore Structure Determination in EPDM Rubbers Using High-Pressure Xe-129 NMR Techniques." Journal of Physical Chemistry B 126, no. 16:3135–3142. PNNL-SA-167432. doi:10.1021/acs.jpcb.1c09189
  • Hao C., T. Liu, W. Liu, M. Fei, L. Shao, W. Kuang, and K.L. Simmons, et al. 2022. "Recyclable CFRPs with Extremely High Tg: Hydrothermal Recyclability in Pure Water and Upcycling of the Recyclates for New Composite Preparation." Journal of Materials Chemistry A 10, no. 29:15623-15633. PNNL-SA-172195. doi:10.1039/D2TA03161B
  • Hardy J.S., A.P. Kulkarni, J.W. Stevenson, and O.A. Marina. 2022. "Conductivity and Transference Number Determination Protocols for Solid Oxide Cell Materials." Frontiers in Energy Research 10. PNNL-SA-169984. doi:10.3389/fenrg.2022.867783
  • Hardy J.S., Y. Chou, J. Choi, and J. Li. 2022. Aluminization Coatings and Glass Seals for High Temperature Systems - CRADA 536 (Final Report). PNNL-33817. Richland, WA: Pacific Northwest National Laboratory. Aluminization Coatings and Glass Seals for High Temperature Systems - CRADA 536 (Final Report)
  • Huber Z.F., E.R. Conte, M.A. Rossiter, A. Soulami, K.P. Brooks, C.L. Painter, and V.V. Joshi, et al. 2022. "A Robust Processing Approach for Producing Highly Loaded Dispersion Fuels." In Proceedings of the 42nd International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR 2022), October 3-5, 2022, Vienna, Austria, Paper No. S5-P2. Lemont, Illinois:Argonne National Laboratory. PNNL-SA-178158.
  • Jiang W., D. Zhang, D. Li, J. Heo, Z. Wang, L. Zhang, and N.R. Overman, et al. 2022. "Behavior of helium cavities in ion-irradiated W-Ni-Fe ductile-phase toughened tungsten." Journal of Nuclear Materials 561. PNNL-SA-166763. doi:10.1016/j.jnucmat.2022.153565
  • Kalsar R., B.J. Schuessler, A. Soulami, and V.V. Joshi. 2022. PNNL's Characterization Summary for MP-2 Experiment. PNNL-33787. Richland, WA: Pacific Northwest National Laboratory. PNNL's Characterization Summary for MP-2 Experiment
  • Kalsar R., X. Ma, J.T. Darsell, D. Zhang, K.S. Kappagantula, D.R. Herling, and V.V. Joshi. 2022. "Microstructure Evolution, Enhanced Aging Kinetics, and Mechanical Properties of AA7075 Alloy after Friction Extrusion." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 833. PNNL-SA-166338. doi:10.1016/j.msea.2021.142575
  • Kappagantula K.S., J. Smith, A.K. Nittala, and F.F. Kraft. 2022. "Macro Copper-Graphene Composites with Enhanced Electrical Conductivity." Journal of Alloys and Compounds 894. PNNL-SA-158464. doi:10.1016/j.jallcom.2021.162477
  • Kassab L., S.A. Howland, H.J. Kvinge, K.S. Kappagantula, and T.H. Emerson. 2022. "TopTemp: Parsing Precipitate Structure from Temper Topology." In ICML Workshop on Topology, Algebra, and Geometry in Machine Learning (TAG:ML 2022), July 20. 2022, Virtual, Online. Proceedings of Machine Learning Research, edited by A. Cloninger, et al, 196, 199 - 205. Maastricht:ML Research Press. PNNL-SA-170620.
  • Kirby B.W., K. Grubel, E.C. Ronnebro, J.S. Hardy, and J. Kim. 2022. Synthesis and Photonic Sintering of Proton Conducting Lanthanide Nickelates. PNNL-33457. Richland, WA: Pacific Northwest National Laboratory. Synthesis and Photonic Sintering of Proton Conducting Lanthanide Nickelates
  • Komarasamy M., S.A. Whalen, B.S. Taysom, and D.R. Herling. 2022. "Co-extrusion of dissimilar Al alloys via shear assisted processing and extrusion." In Light Metals Symposium held at the TMS Annual Meeting and Exhibition, (Light Metals 2022), February 27-March 2, 2022, Anaheim, CA, edited by D. Eskin, 308-313. Cham:Springer. PNNL-SA-166339. doi:10.1007/978-3-030-92529-1_43
  • Kulkarni S.S., K. Choi, and K.L. Simmons. 2022. "Coupled diffusion-deformation-damage model for polymers used in hydrogen infrastructure." In ASME 17th International Manufacturing Science and Engineering Conference (MSEC 2022), June 27-July1, 2022, West Lafayette, IN, 2, MSEC2022-80231; V002T05A003. New York, New York:The American Society of Mechanical Engineers. PNNL-SA-168651. doi:10.1115/MSEC2022-80231
  • Li L., A.A. Fortier, D. Ramirez Tamayo, V.V. Joshi, and A. Soulami. 2022. "Minimizing thickness variation in monolithic U-10Mo fuel foil and Zr interlayer during hot rolling: A microstructure-based finite element method analysis." Materials Today Communications 32. PNNL-SA-168343. doi:10.1016/j.mtcomm.2022.103910
  • Li L., M. Reza E Rabby, N.R. Overman, T. Wang, S.A. Whalen, G.J. Grant, and S.N. Mathaudhu, et al. 2022. "Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method." Materials & Design 221. PNNL-SA-173428. doi:10.1016/j.matdes.2022.111010
  • Li S., C.A. Powell, S.N. Mathaudhu, B. Gwalani, A. Devaraj, and C. Wang. 2022. "Review of recent progress on in situ TEM shear deformation: a retrospective and perspective view." Journal of Materials Science 57, no. 26:12177–12201. PNNL-SA-169397. doi:10.1007/s10853-022-07331-4
  • Li S., N. Chen, A. Rohatgi, Y. Li, C.A. Powell, S.N. Mathaudhu, and A. Devaraj, et al. 2022. "Nanotwin Assisted Reversible Formation of Low Angle Grain Boundary Upon Reciprocating Shear Load." Acta Materialia 230. PNNL-SA-167698. doi:10.1016/j.actamat.2022.117850
  • Li X., M. Reza E Rabby, A.D. Guzman, G.J. Grant, S.N. Mathaudhu, M. Hinton, and A.P. Reynolds. 2022. "Strain and strain rate in friction extrusion." Journal of Materials Research and Technology 20. PNNL-SA-170376. doi:10.1016/j.jmrt.2022.07.116
  • Li X., T. Wang, X. Ma, N.R. Overman, S.A. Whalen, D.R. Herling, and K.S. Kappagantula. 2022. "Manufacture aluminum alloy tube from powder with a single-step extrusion via ShAPE." Journal of Manufacturing Processes 80. PNNL-SA-169412. doi:10.1016/j.jmapro.2022.05.060
  • Ma X., B. Gwalani, J. Tao, M. Efe, M.J. Olszta, M. Song, and S.B. Yadav, et al. 2022. "Shear strain gradient in Cu/Nb nanolaminates: strain accommodation and chemical mixing." Acta Materialia 234. PNNL-SA-168943. doi:10.1016/j.actamat.2022.117986
  • Ma X., X. Li, G. Petrossian, A. Ortiz, M. Komarasamy, S.A. Whalen, and G.J. Grant, et al. 2022. "Porosity evolution during heating of copper made from powder by friction extrusion." Materialia 21. PNNL-SA-166323. doi:10.1016/j.mtla.2022.101341
  • Mason C., K. Choi, A. Soulami, K.I. Johnson, K.P. Brooks, N.K. Karri, and V.V. Joshi. 2022. "Computational Modeling of Multi-Pass Rolling Parameters Effect on Resulting Fuel Foil Shape." In Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), October 30-November 3, 2022, Columbus, OH, IMECE2022-95081, V006T08A047. New York, New York:ASME. PNNL-SA-172583. doi:10.1115/IMECE2022-95081
  • Nasim W., H. Das, S.S. Kulkarni, A. Rohatgi, D.R. Herling, G.J. Grant, and P. Upadhyay, et al. 2022. "Local Thermomechanical Processing for Improving Formability of High Strength Aluminum Sheets." In SAE Annual World Congress Experience, (WCX 2022), April 5-7, 2022, Virtual, Online. SAE Technical Papers, Paper No. 2022-01-0244. Warrendale, Pennsylvania:SAE International. PNNL-SA-168320. doi:10.4271/2022-01-0244
  • Peles A., S.A. Whalen, and G.J. Grant. 2022. Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing. PNNL-32875. Richland, WA: Pacific Northwest National Laboratory. Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing
  • Prabhakaran R., G.W. Coffey, O.A. Marina, J.S. Hardy, D.J. Edwards, and A.M. Casella. 2022. Final Report: Improved Understanding of Zircaloy Hydrogen Pickup Mechanisms in BWRs. NSUF Report. PNNL-32984. Richland, WA: Pacific Northwest National Laboratory. Final Report: Improved Understanding of Zircaloy Hydrogen Pickup Mechanisms in BWRs. NSUF Report
  • Qiao Y., D.R. Merkel, E.K. Nickerson, R.J. Seffens, Y. Shin, M. Pallaka, and J.L. Ramos, et al. 2022. "The Roles of Interface, Adherend, and Adhesive in Plasma- and Other-treated Joints of Metals and FRP Materials Under Shear Deformation." In Proceedings of the American Society for Composites - 37th Technical Conference, (ASC 2022), September 19-21, 2022, Tucson, AZ, edited by O. Zhupanska and E. Madenci. Lancaster, Pennsylvania:DEStech Publications, Inc. PNNL-SA-174097. doi:10.12783/asc37/36378
  • Qiao Y., D.R. Merkel, E.K. Nickerson, Y. Shin, R.J. Seffens, A. Ortiz, and K.L. Simmons. 2022. "Mode I Tensile Fracture Behavior of Adhesively-bonded Metal-Metal, Metal-CFRP, and CFRP-CFRP Bi-material Combinations Analyzed by Size Effect Method." Composites. Part A, Applied science and manufacturing 160. PNNL-SA-170430. doi:10.1016/j.compositesa.2022.107025
  • Qiao Y., M. Pallaka, E.K. Nickerson, L.D. Fring, and K.L. Simmons. 2022. "Understanding the Elastic, Plastic, and Damage Features in Fracturing of Self-reinforced Thermoplastic Composites via Non-destructive Digital Imaging Correlation." In Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XVI, March 6-April 11, 2022, Long Beach, CA. Proceedings of the SPIE, edited by H.F. Wu, et al, 1204707, Paper No. 1204707. Bellingham, Washington:SPIE. PNNL-SA-170916. doi:10.1117/12.2615378
  • Qiao Y., Y. Shin, E.K. Nickerson, D.R. Merkel, A. Ortiz, and K.L. Simmons. 2022. "Adhesively-bonded Metal-CFRTP Bi-materials: Enhanced Crack Growth Resistance via Plasma and Quantified Fracture via Size Effect Method." In Proceedings of the American Society for Composites - 37th Technical Conference, (ASC 2022), September 19-21, 2022, Tucson, AZ, edited by O. Zhupanska and E. Madenci. Lancaster, Pennsylvania:DEStech Publications, Inc. PNNL-SA-173713. doi:10.12783/asc37/36496
  • Reza E Rabby M., A. Srivastava, M. Pole, A.K. Nittala, B. Gwalani, and K.S. Kappagantula. 2022. Solid Phase Processing of Lead-Free Brass with Carbon Additives. PNNL-33415. Richland, WA: Pacific Northwest National Laboratory. Solid Phase Processing of Lead-Free Brass with Carbon Additives
  • Royer J.I., S. Shahrezaei, A. Soulami, K.P. Brooks, M.T. Athon, Z.F. Huber, and M.A. Rhodes, et al. 2022. Hot Forging Options for Thick Castings. PNNL-34151. Richland, WA: Pacific Northwest National Laboratory. Hot Forging Options for Thick Castings
  • Schuessler B.J., R. Kalsar, and V.V. Joshi. 2022. Automated Calculation of U-10Mo Fuel and Zr Cladding Thickness. PNNL-34166. Richland, WA: Pacific Northwest National Laboratory. Automated Calculation of U-10Mo Fuel and Zr Cladding Thickness
  • Shahrezaei S., A. Soulami, B.J. Schuessler, R. Kalsar, and V.V. Joshi. 2022. Microstructural Characterization of As-Cast MP-1 Experiment U-10Mo Alloy. PNNL-32860. Richland, WA: Pacific Northwest National Laboratory. Microstructural Characterization of As-Cast MP-1 Experiment U-10Mo Alloy
  • Shin Y., Y. Qiao, N.L. Canfield, Z. Yu, H. Meyer, D.R. Merkel, and E.K. Nickerson, et al. 2022. "Significant slowdown of plasma-optimized surface energy deactivation by vacuum sealing for efficient adhesive bonding." Composites Part B: Engineering 240. PNNL-SA-170346. doi:10.1016/j.compositesb.2022.110001
  • Shrestha R., J.A. Ronevich, L.D. Fring, K.L. Simmons, N. Meeks, Z. Lowe, and T. Harris, et al. 2022. "Compatibility of Medium Density Polyethylene (MDPE) for Distribution of Gaseous Hydrogen." In Proceedings of the ASME 2022 Pressure Vessels & Piping Conference, July 17-22, 2022, Las Vegas, NV, 4B, Paper No: PVP2022-84791, V04BT06A041. New York, New York:American Society of Mechanical Engineers. PNNL-SA-171543. doi:10.1115/PVP2022-84791
  • Simmons K.L., L.D. Fring, W. Kuang, Y. Shin, Y. Chou, Y. Ni, and Y. Qiao, et al. 2022. Gap Analysis on the Impacts of Hydrogen Addition to the North American Natural Gas Infrastructure Polyethylene Pipelines. PNNL-33736. Richland, WA: Pacific Northwest National Laboratory. Gap Analysis on the Impacts of Hydrogen Addition to the North American Natural Gas Infrastructure Polyethylene Pipelines
  • Song M., S. Jana, Z.F. Huber, L.E. Sweet, C.A. Lavender, and V.V. Joshi. 2022. "Delayed onset of discontinuous precipitation-based phase transformation in U10Mo alloys doped with Silicon." Journal of Alloys and Compounds 922. PNNL-SA-170469. doi:10.1016/j.jallcom.2022.166311
  • Strange L.E., V. Shutthanandan, M. Song, M.E. Bowden, Q. Miller, R. Prabhakaran, and R.W. Shimskey, et al. 2022. "Multimodal Analysis and Characterization of the Boehmite Layer formed on AA6061 Before and After Alkaline Etching." Journal of Materials Research and Technology 21. PNNL-SA-174631. doi:10.1016/j.jmrt.2022.09.125
  • Wang T., S.A. Whalen, X. Ma, J.A. Silverstein, H. Das, M. Pallaka, and A. Ortiz, et al. 2022. "Friction-based riveting technique for AZ31 magnesium alloy." Journal of Magnesium and Alloys 10, no. 1:110 - 118. PNNL-SA-155089. doi:10.1016/j.jma.2021.06.004
  • Yang X., J.S. Hardy, C.A. Coyle, J.F. Bonnett, S.M. Mahserejian, and J.W. Stevenson. 2022. "In-Operando XRD Study of the Effects of Water Vapor on Phase Formation in LSM/YSZ SOFC Cathodes." Journal of the Electrochemical Society 169, no. 2:Art. No. 024512. PNNL-SA-167920. doi:10.1149/1945-7111/ac4f6e
  • Yu A., M. Pole, J.D. Escobar, K.N. Bozhilov, J. Liu, J.A. Silverstein, and S. Mukherjee, et al. 2022. "Decoupling of Strain and Temperature Effects on Microstructural Evolution during High Shear Strain Deformation." Materialia 22. PNNL-SA-169751. doi:10.1016/j.mtla.2022.101402
  • Yu X., B.E. Matthews, S.L. Riechers, S.R. Spurgeon, Z. Zhu, G.J. Sevigny, and W.G. Luscher. 2022. "Multimodal Imaging of the Evolving Interface of the Irradiated Aluminide-coated Stainless-steel Cladding." Microscopy and Microanalysis 28, no. Suppl 1:996 - 997. PNNL-SA-170393. doi:10.1017/S1431927622004317
  • Zhang Y., R.E. Komorek, Z. Zhu, Q. Huang, W. Chen, J.K. Jansson, and G.C. Jansson, et al. 2022. "Mass Spectral Imaging Showing the Plant Growth-Promoting Rhizobacteria's Effect on the Brachypodium Awn." Biointerphases 17, no. 3:Art. No. 031006. PNNL-SA-168695. doi:10.1116/6.0001949
  • Zhou H., H. Ren, P.D. Royer, H. Hou, and X. Yu. 2022. "Big Data Analytics for Long-Term Meteorological Observations at Hanford Site." Atmosphere 13, no. 1:136. PNNL-SA-168627. doi:10.3390/atmos13010136

2021

  • Choi J., J.F. Bonnett, N.L. Canfield, and J.S. Hardy. 2021. "Electrically Conductive and Protective Coating Compatibility with LSCF Cathodes." In Proceedings of the 17th International Symposium on Solid Oxide Fuel Cells, (SOFC 2021), July 18-23, 2021, Stockholm, Sweden. ECS Transactions, 103, 1827-1834. PNNL-SA-162493. doi:10.1149/10301.1827ecst
  • Choi K., C.B. Smith, W. Kuang, N.R. Overman, X. Ma, W. Cai, and B. Carlson. 2021. Prediction of Aluminum to Steel RSW Joint Failure - CRADA 405 (Final Report). PNNL-32400. Richland, WA: Pacific Northwest National Laboratory. Prediction of Aluminum to Steel RSW Joint Failure - CRADA 405 (Final Report)
  • Chou Y., T. Jin, N.L. Canfield, J.F. Bonnett, J. Choi, and J.S. Hardy. 2021. "Lanthanum Strontium Cobaltite-Alumina Fiber Composite Contact Material for Solid Oxide Fuel Cells." In Proceedings of the 17th International Symposium on Solid Oxide Fuel Cells (SOFC-XVII), July 18-23, 2021, Stockholm, Sweden. ECS Transactions, 103, 1835 - 1846. PNNL-SA-162624. doi:10.1149/10301.1835ecst
  • Darsell J.T., D. Zhang, N.R. Overman, D.R. Herling, and V.V. Joshi. 2021. "Eliminating Yield Anisotropy and Enhancing Ductility in Mg Alloys by Shear Assisted Processing and Extrusion." In Magnesium Technology 2021, 91-99. Pittsburgh, Pennsylvania:The Minerals, Metals & Materials Society. PNNL-SA-156766. doi:10.1007/978-3-030-65528-0_15
  • Darsell J.T., D. Zhang, N.R. Overman, N.L. Canfield, T.J. Roosendaal, and K.S. Kappagantula. 2021. Manufacturing Dissolvable Alloy Components using ShAPE: A Study on Solid Phase Processing of Mg-W Composites and WJ11 Alloys. PNNL-32134. Richland, WA: Pacific Northwest National Laboratory. Manufacturing Dissolvable Alloy Components using ShAPE: A Study on Solid Phase Processing of Mg-W Composites and WJ11 Alloys
  • Efe M., B. Gwalani, J. Tao, M. Song, T.C. Kaspar, A. Devaraj, and A. Rohatgi. 2021. "Nanomechanical Scratching Induced Local Shear Deformation and Microstructural Evolution in Single Crystalline Copper." Applied Surface Science 562. PNNL-SA-158843. doi:10.1016/j.apsusc.2021.150132
  • Efe M., T. Mungole, D. Weiss, and A. Rohatgi. 2021. Overcoming the Barriers to Lightweighting by Enabling Low-Cost and High-Performance Structural Automotive Aluminum Castings (CRADA 404). PNNL-35668. Richland, WA: Pacific Northwest National Laboratory. Overcoming the Barriers to Lightweighting by Enabling Low-Cost and High-Performance Structural Automotive Aluminum Castings (CRADA 404)
  • Frazier W.E., V.V. Joshi, N.R. Overman, M.A. Rhodes, T.J. Roosendaal, R.J. Seffens, and E.K. Nickerson, et al. 2021. Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE). PNNL-32477. Richland, WA: Pacific Northwest National Laboratory. Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE)
  • Gwalani B., M. Pole, K.E. Whalen, S. Li, B.T. O'Callahan, J. Tao, and A.K. Nittala, et al. 2021. Evaluating Effects of Shear Processing on 2D Crystalline Materials in 3D Metal Matrices: Atomistic Understanding of High Shear Deformation of Copper Graphene Composites. PNNL-32102. Richland, WA: Pacific Northwest National Laboratory. Evaluating Effects of Shear Processing on 2D Crystalline Materials in 3D Metal Matrices: Atomistic Understanding of High Shear Deformation of Copper Graphene Composites
  • Gwalani B., W. Fu, M.J. Olszta, J.A. Silverstein, D. Yadav, P. Manimunda, and A.D. Guzman, et al. 2021. "Lattice misorientation evolution and grain refinement in Al-Si alloys under high-strain shear deformation." Materialia 18. PNNL-SA-160821. doi:10.1016/j.mtla.2021.101146
  • Jana S., M.J. Olszta, D.J. Edwards, M.H. Engelhard, A. Samanta, H. Ding, and P. Murkute, et al. 2021. "Microstructural basis for improved corrosion resistance of laser surface processed AZ31 Mg alloy." Corrosion Science 191. PNNL-SA-156519. doi:10.1016/j.corsci.2021.109707
  • Kaspar T.C., Q. Pang, P.V. Sushko, M.E. Bowden, J. Tao, B. Gwalani, and M.J. Olszta, et al. 2021. "Metastable orientation relationships in thin film Cu-Cr bilayers." Scripta Materialia 194. PNNL-SA-156813. doi:10.1016/j.scriptamat.2020.113635
  • Kirby B.W., J.S. Hardy, C.A. Coyle, N.L. Canfield, and T.C. Droubay. 2021. "Sr and Co Vapor-Phase Transport from LSCF Cathodes." In 17th International Symposium on Solid Oxide Fuel Cells (SOF-XVII) July 18, 2021 - July 23, 2021 Stockholm, Sweden. ECS Transactions, 103, 1415-1424. Bristol:IOP Publishing. PNNL-SA-163853. doi:10.1149/10301.1415ecst
  • Komarasamy M., X. Li, S.A. Whalen, X. Ma, N.L. Canfield, M.J. Olszta, and T. Varga, et al. 2021. "Microstructural evolution in Cu-Nb processed via friction consolidation." Journal of Materials Science 56, no. 22:12864-12880. PNNL-SA-158852. doi:10.1007/s10853-021-06093-9
  • Kuang W., W.D. Bennett, T.J. Roosendaal, B.W. Arey, A. Dohanlkova, G. Petrossian, and K.L. Simmons. 2021. "In situ friction and wear behavior of rubber materials incorporating various fillers and/or a plasticizer in high-pressure hydrogen." Tribology International 153. PNNL-SA-153343. doi:10.1016/j.triboint.2020.106627
  • Kulkarni S.S., H. Das, D. Ramirez Tamayo, X. Ma, T. Wang, D. Zhang, and P. Upadhyay, et al. 2021. "A Combined Experimental and Modeling Approach to Investigate the Performance of Joint Between AZ31 Magnesium and Uncoated DP590 Steel Using Friction Stir-Assisted Scribe Technique." Journal of Materials Engineering and Performance 30, no. 11:8296–8308. PNNL-SA-158790. doi:10.1007/s11665-021-06060-0
  • Kulkarni S.S., K. Choi, W. Kuang, N.C. Menon, B. Mills, A. Soulami, and K.L. Simmons. 2021. "Damage evolution in polymer due to exposure to high-pressure hydrogen gas." International Journal of Hydrogen Energy 46, no. 36:19001-19022. PNNL-SA-158973. doi:10.1016/j.ijhydene.2021.03.035
  • Kulkarni S.S., T.J. Truster, H. Das, V. Gupta, A. Soulami, P. Upadhyay, and D.R. Herling. 2021. "Microstructure-based modeling of friction stir welded joint of dissimilar metals using crystal plasticity." Journal of Manufacturing Science and Engineering 143, no. 12:Art. No. 121008. PNNL-SA-160187. doi:10.1115/1.4051190
  • Kulkarni S.S., V. Gupta, A. Ortiz, H. Das, P. Upadhyay, E.I. Barker, and D.R. Herling. 2021. "Determining cohesive parameters for modeling interfacial fracture in dissimilar-metal friction stir welded joints." International Journal of Solids and Structures 216. PNNL-SA-153218. doi:10.1016/j.ijsolstr.2021.01.023
  • Li L., V. Gupta, X. Li, A.P. Reynolds, G.J. Grant, and A. Soulami. 2021. "Meshfree Simulation and Experimental Validation of Extreme Thermomechanical Conditions in Friction Stir Extrusion." Computational Particle Mechanics 8, no. 2021:1-21. PNNL-SA-159353. doi:10.1007/s40571-021-00445-7
  • Li X., C. Zhou, N.R. Overman, X. Ma, N.L. Canfield, K.S. Kappagantula, and J.G. Schroth, et al. 2021. "Copper carbon composite wire with a uniform carbon dispersion made by friction extrusion." Journal of Manufacturing Processes 65. PNNL-SA-159070. doi:10.1016/j.jmapro.2021.03.055
  • Li X., M. Reza E Rabby, M.E. Ryan, G.J. Grant, and A.P. Reynolds. 2021. "Evaluation of Orthogonal Strain Components in Friction Extrusion." Journal of Materials Research and Technology 15. PNNL-SA-157484. doi:10.1016/j.jmrt.2021.10.001
  • Liu T., C. Hao, L. Shao, W. Kuang, L. Cosimbescu, K.L. Simmons, and J. Zhang. 2021. "Carbon Fiber Reinforced Epoxy Vitrimer: Robust Mechanical Performance and Facile Hydrothermal Decomposition in Pure Water." Macromolecular Rapid Communications 42, no. 3:Article No. 2000458. PNNL-SA-158250. doi:10.1002/marc.202000458
  • Liu T., M.J. Olszta, B. Gwalani, C. Park, S. Mathaudhu, and A. Devaraj. 2021. "Phase Transformations, Microstructural Refinement and Defect Evolution Mechanisms in Al-Si Alloys under Non-Hydrostatic Diamond Anvil Cell Compression." Materialia 15. PNNL-SA-158218. doi:10.1016/j.mtla.2021.101049
  • Merkel D.R., E.K. Nickerson, R.J. Seffens, K.L. Simmons, C.W. San Marchi, B.J. Kagay, and J.A. Ronevich. 2021. "Effect of hydrogen on tensile properties of 304L stainless steel at cryogenic temperatures." In Proceedings of the ASME Pressure Vessels & Piping Conference (PVP 2021), July 13-15, 2021, Virtual, Online, 4, Paper No: PVP2021-62436, V004T06A055. New York, New York:ASME. PNNL-SA-159130. doi:10.1115/PVP2021-62436
  • Nguyen B., H. Roh, D.R. Merkel, and K.L. Simmons. 2021. "A Predictive Modeling Tool for Damage Analysis and Design of Hydrogen Storage Composite Pressure Vessels." International Journal of Hydrogen Energy 46, no. 39:20573-20585. PNNL-SA-159535. doi:10.1016/j.ijhydene.2021.03.139
  • Olszta M.J., N.R. Overman, M. Reza E Rabby, T.J. Roosendaal, M. Mcdonnell, and S.A. Whalen. 2021. "Joining AA7099 to Ni-Cr-Mo Steel Using Single Pass Friction Stir Dovetailing and AA6061 Butter Layer." JOM. The Journal of the Minerals, Metals and Materials Society 73, no. 7:2203-2211. PNNL-SA-155286. doi:10.1007/s11837-021-04668-0
  • Overman N.R., X. Li, M.J. Olszta, E.K. Nickerson, C.T. Overman, S. Mathaudhu, and G.J. Grant, et al. 2021. "Microstructural Progression of Shear-Induced Mixing in a CuNi Alloy." Materials Characterization 171. PNNL-SA-155870. doi:10.1016/j.matchar.2020.110759
  • Reynolds A.P., X. Li, M. Reza E Rabby, M. Komarasamy, and G.J. Grant. 2021. Discovering SPP Thermomechanical Pathways. PNNL-32133. Richland, WA: Pacific Northwest National Laboratory. Discovering SPP Thermomechanical Pathways
  • Reza E Rabby M., M.J. Olszta, N.R. Overman, M. Mcdonnell, and S.A. Whalen. 2021. "Friction Stir Dovetailing of AA7099 to Steel with AA6061 Interlayer for Reduced Zn Embrittlement at Dissimilar Interface." Journal of Manufacturing Processes 61. PNNL-SA-155326. doi:10.1016/j.jmapro.2020.10.084
  • Reza E Rabby M., T.J. Roosendaal, P. Upadhyay, N.R. Overman, J.A. Silverstein, M. Mcdonnell, and S.A. Whalen. 2021. "Process Robustness of Friction Stir Dovetailing of AA7099 to Steel with In Situ AA6061 Interlayer Linking." In Friction Stir Welding and Processing XI. The Minerals, Metals & Materials Series, edited by Y. Hovanski, et al. Cham:Springer. PNNL-SA-155938. doi:10.1007/978-3-030-65265-4_14
  • Rohatgi A., K. Sadayappan, D.T. Clelland, and G. Birsan. 2021. "Joining Light Metals with Polymer Composites Through Metal Overcasting." Journal of Materials Processing Technology 298. PNNL-SA-158758. doi:10.1016/j.jmatprotec.2021.117257
  • Schuessler B.J., D. Field, N.R. Overman, and V.V. Joshi. 2021. "The Effect of Homogenization Heat Treatment on the Texture Evolution in U-10Mo Alloy." Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science 52, no. 9:3871 - 3879. PNNL-SA-152490. doi:10.1007/s11661-021-06349-8
  • Simmons K.L. 2021. Lightweighting Technology by Enhanced Composite with Fully Recyclable Particles (LiTE CFRP) - CRADA 519. PNNL-SA-166045. Richland, WA: Pacific Northwest National Laboratory. Lightweighting Technology by Enhanced Composite with Fully Recyclable Particles (LiTE CFRP) - CRADA 519
  • Simmons K.L., and W. Kuang. 2021. High-Pressure, Low Temperature Composite Nozzles for Long-Term H2 Dispensing - CRADA 399 (Final Report). PNNL-30887. Richland, WA: Pacific Northwest National Laboratory. High-Pressure, Low Temperature Composite Nozzles for Long-Term H2 Dispensing - CRADA 399 (Final Report)
  • Simmons K.L., W. Kuang, S.D. Burton, B.W. Arey, Y. Shin, N.C. Menon, and B. Smith. 2021. "H-Mat Hydrogen Compatibility of Polymers and Elastomers." International Journal of Hydrogen Energy 46, no. 23:12300-12310. PNNL-SA-153003. doi:10.1016/j.ijhydene.2020.06.218
  • Taysom B.S., N.R. Overman, M.J. Olszta, M. Reza E Rabby, T. Skszek, M. Diciano, and S.A. Whalen. 2021. "Shear assisted processing and extrusion of enhanced strength aluminum." International Journal of Machine Tools and Manufacture 169. PNNL-SA-162162. doi:10.1016/j.ijmachtools.2021.103798
  • Whalen S.A., M.J. Olszta, M. Reza E Rabby, T.J. Roosendaal, T. Wang, D.R. Herling, and B.S. Taysom, et al. 2021. "High Speed Manufacturing of Aluminum Alloy 7075 Tubing by Shear Assisted Processing and Extrusion (ShAPE)." Journal of Manufacturing Processes 71. PNNL-SA-164792. doi:10.1016/j.jmapro.2021.10.003
  • Zang Y., A. Peek, Y. Shin, D.W. Gotthold, and B. Hinds. 2021. "Catalytic reduction of graphene oxide membranes and water selective channel formation in water-alcohol separations." Membranes 11, no. 5:317. PNNL-SA-157058. doi:10.3390/membranes11050317

2020

  • Bair J.L., D.G. Abrecht, N.R. Overman, A.D. Guzman, D.A. Collins, R.M. Cox, and S.L. Riechers. 2020. Improving Ductility of Hydride Embrittled Zirconium: Final Report. PNNL-30487. Richland, WA: Pacific Northwest National Laboratory. Improving Ductility of Hydride Embrittled Zirconium: Final Report
  • Chou Y., N.L. Canfield, J.F. Bonnett, J.S. Hardy, and J.W. Stevenson. 2020. "Thermal, mechanical, and electrical properties of LSCo/mullite composite contact materials for solid oxide fuel cells." International Journal of Applied Ceramic Technology 17, no. 5:2051-2061. PNNL-SA-148106. doi:10.1111/ijac.13536
  • Gwalani B., M.J. Olszta, S. Varma, L. Li, A. Soulami, E.J. Kautz, and S. Pathak, et al. 2020. "Extreme Shear-Deformation-Induced Modification of Defect Structures and Hierarchical Microstructure in an Al–Si Alloy." Communications Materials 1. PNNL-SA-153669. doi:10.1038/s43246-020-00087-x
  • Jiang X., N.R. Overman, C.B. Smith, and K.A. Ross. 2020. "Microstructure, hardness and cavitation erosion resistance of different cold spray coatings on stainless steel 316 for hydropower applications." Materials Today Communications 25. PNNL-SA-153058. doi:10.1016/j.mtcomm.2020.101305
  • Kalsar R., F.G. Di Lemma, T. Trowbridge, E. Tegtmeier, R. Mccabe, R. Prabhakaran, and N.R. Overman, et al. 2020. Characterization Report for the MP-1 Experiment Fabrication Campaign. PNNL-30372 Rev. 1. Richland, WA: Pacific Northwest National Laboratory. Characterization Report for the MP-1 Experiment Fabrication Campaign
  • Kalsar R., F.G. Di Lemma, T. Trowbridge, E. Tegtmeier, R. McCabe, R. Prabhakaran, and N.R. Overman, et al. 2020. Characterization Report for the MP-1 Experiment Fabrication Campaign. PNNL-30372. Richland, WA: Pacific Northwest National Laboratory. doi:10.2172/1763443.Characterization Report for the MP-1 Experiment Fabrication Campaign
  • Kuang W., S. Lee, B. Zhao, L.S. Fifield, K.L. Simmons, J. Zhang, and T.T. Bisel, et al. 2020. Malleable Thermosets (Vitrimers) from CO2 and Plants. PNNL-30668. Richland, WA: Pacific Northwest National Laboratory. Malleable Thermosets (Vitrimers) from CO2 and Plants
  • Reehl S.M., K.S. Kappagantula, E.J. Kautz, L.J. Gosink, and E.A. Machorro. 2020. Mirostructure Characterization of Friction Consolidated Copper-Nickel using a Machine Learning Approach: Developing Process to Microstructure Associations. PNNL-30565. Richland, WA: Pacific Northwest National Laboratory. Mirostructure Characterization of Friction Consolidated Copper-Nickel using a Machine Learning Approach: Developing Process to Microstructure Associations

Energy and Environment

Core Research Areas

Contacts