Skip to Main Content U.S. Department of Energy
Energy and Environment Directorate

Publications

Reactor Materials and Mechanical Design Group

97 publications found:

2024

  • Balusu K., H. Das, S. Shukla, A. Soulami, and P. Upadhyay. 2024. "Investigating strength increasing modifications to a friction stir welded AA7075 T-peel joint's exist location: a modeling led study." The International Journal of Advanced Manufacturing Technology 130, no. 11-12:5591–5600. PNNL-SA-184862. doi:10.1007/s00170-024-12961-w
  • Beck P., M. Hayne, C. Liu, J.A. Valdez, T.J. Nizolek, S.A. Briggs, and S.A. Maloy, et al. 2024. "Mandrel Diameter Effect on Ring-pull Testing of Nuclear Fuel Cladding." Journal of Nuclear Materials 596, no. _:Art. No. 155087. PNNL-SA-194962. doi:10.1016/j.jnucmat.2024.155087
  • Byun T., D. Collins, T.G. Lach, J. Choi, and S.A. Maloy. 2024. "Thermomechanical Processing for Improved Mechanical Properties of HT9 Steels." Materials 17, no. 15:Art. No. 3805. PNNL-SA-202545. doi:10.3390/ma17153803
  • Gwalani B., A. Martin, E.J. Kautz, B. Guo, S.M. Lambeets, M.J. Olszta, and A. Battu, et al. 2024. "Mechanistic Understanding of Speciated Oxide Growth in High Entropy Alloys." Nature Communications 15, no. _:Art. No. 5026. PNNL-SA-200066. doi:10.1038/s41467-024-49243-8
  • Haag J.V., M.J. Olszta, D.J. Edwards, W. Jiang, and W. Setyawan. 2024. "Characterization of boundary precipitation in a heavy ion irradiated tungsten heavy alloy under the simulated fusion environment." Acta Materialia 274. PNNL-SA-182623. doi:10.1016/j.actamat.2023.119059
  • Hubbard L.R., F.W. Hilty, A. Roy, S.M. Miley, N.R. Overman, S.E. Muller, and K.R. Fiedler, et al. 2024. "Optical Evidence of Compositional Fractioning Between Plasma-Condensed and Melt Pool Matter." Advanced Engineering Materials 26, no. 13:Art. No. 2302177. PNNL-SA-193129. doi:10.1002/adem.202302177
  • Kafil V., B. Lee, M. Hadj-Nacer, Y. Wang, J. Yoon, M. Greiner, and S. Shin, et al. 2024. "Hydrogen Sensing in Different Hydrogen-Carrying Gases Using Composites of PdSnO2 and Halloysite Nanotubes." Sensors and Actuators A: Physical 376, no. _:Art No. 115622. PNNL-SA-196308. doi:10.1016/j.sna.2024.115622
  • Kalsar R., N.R. Overman, J.T. Darsell, J.D. Escobar, L. Li, T. Wang, and X. Ma, et al. 2024. "Material flow behavior and microstructural refinement of AA6061 alloy during friction extrusion." Materials Characterization 208. PNNL-SA-189195. doi:10.1016/j.matchar.2024.113636
  • Kolleboyina J., C. Yeom, H. Lee, S. Gobbilla, S. Eadi, P.K. Thallapally, and H. Kwon, et al. 2024. "Advanced Functional Materials ZnO@ZIF-8 Heterostructures for Neuromorphic Synaptic Devices." Cell Reports Physical Science 5, no. 10:102219. PNNL-SA-196286. doi:10.1016/j.xcrp.2024.102219
  • Kruska K., M.J. Olszta, J. Wang, and D.K. Schreiber. 2024. "Intergranular Corrosion of Ni-30Cr in High-Temperature Hydrogenated Water after Removing Surface Passivating Film." npj Materials Degradation 8. PNNL-SA-184606. doi:10.1038/s41529-024-00442-0
  • Li L., J.D. Escobar, H. Das, S. Shukla, B.J. Schuessler, N.R. Overman, and G.J. Grant, et al. 2024. "A Dislocation Density-Based Meshfree Computational Framework for Solid Phase Processing." International Journal of Mechanical Sciences 267. PNNL-SA-189360. doi:10.1016/j.ijmecsci.2024.108962
  • Li L., M. Pole, H. Das, S. Niverty, M. Reza E Rabby, J. Fernandez dos Santos, and A. Soulami. 2024. "Meshfree Process Modeling and Experimental Validation of Friction Riveting of Aluminum 5052 to Aluminum 6061." In Light Metals 2024: Proceedings of the Light Metals Symposium held at the TMS Annual Meeting and Exhibition, March 3-7, 2024, Orlando, FL, edited by S. Wagstaff, 298–305. PNNL-SA-189749. doi:10.1007/978-3-031-50308-5_39
  • Li X., H. Das, M. Pole, L. Li, A. Soulami, G.J. Grant, and D.R. Herling, et al. 2024. "Exceptional Strength and Wear Resistance in an AA7075/TiB2 Composite Fabricated via Friction Consolidation." Materials & Design 242, no. _:Art. No. 113006. PNNL-SA-194466. doi:10.1016/j.matdes.2024.113006
  • Liu T., J.D. Escobar, M.J. Olszta, and O.A. Marina. 2024. "Role of Phosphorus Impurities in Decomposition of La2NiO4-La0.5Ce0.5O2-d Oxygen Electrode in a Solid Oxide Electrolysis Cell." Journal of Power Sources 589. PNNL-SA-186089. doi:10.1016/j.jpowsour.2023.233748
  • Olszta M.J., K.H. Yano, D.F. Hopkins, K.R. Fiedler, J.V. Haag, and I.J. van Rooyen. 2024. TiltEM User Manual. PNNL-36495. Richland, WA: Pacific Northwest National Laboratory. TiltEM User Manual
  • Riley B.J., C.L. Beck, J.S. Evarts, S. Chong, A.M. Lines, H.M. Felmy, and J. Mcfarlane, et al. 2024. "Analytical capabilities for iodine detection: Review of possibilities for different applications." AIP Advances 14, no. 8:Art. No. 080701. PNNL-SA-195189. doi:10.1063/5.0208591
  • Robinson A.J., H.M. Johnson, S. Chong, B.J. Riley, M.K. Murphy, P.K. Okabe, and P.K. Thallapally. 2024. "Noble Gas Management with Radiation-Tolerant MOF for Molten Salt Reactors." Cell Reports Physical Science 5, no. 2:Art. No. 101829. PNNL-SA-191719. doi:10.1016/j.xcrp.2024.101829
  • Roy A., L.R. Hubbard, N.R. Overman, K.R. Fiedler, D.B. Horangic, F.W. Hilty, and M.L. Taheri, et al. 2024. "Machine learning and molecular dynamics simulations aided insights into condensate ring formation in laser spot welding." Scientific Reports 14, no. _:Art. No. 30068. PNNL-SA-200209. doi:10.1038/s41598-024-79755-8
  • Shaikh S., M. Taufique, K. Balusu, S.S. Kulkarni, F. Hale, J.K. Oleson, and R. Devanathan, et al. 2024. "Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-based Battery Enclosures for Crashworthiness." Applied Composite Materials 31, no. 5:1475–1493. PNNL-SA-184696. doi:10.1007/s10443-024-10218-z
  • Shin S., and P.K. Thallapally. 2024. Magnetic Nanoparticle Extraction of Lithium from Produced Waters - CRADA 483 (Final Report). PNNL-35345. Richland, WA: Pacific Northwest National Laboratory. Magnetic Nanoparticle Extraction of Lithium from Produced Waters - CRADA 483 (Final Report)
  • Thallapally P.K. 2024. Surface Acoustic Wave Sensor for Refrigerant Leak Detection - CRADA 402 (Abstract). PNNL-35270. Richland, WA: Pacific Northwest National Laboratory.
  • van Rooyen I., S. Meher, P.K. Thallapally, J. Fernandez dos Santos, C.M. Silva, S. Shin, and T. Wang, et al. 2024. Nuclear Energy Critical Material Waste Minimization Enabled by AM Techniques. PNNL-36049. Richland, WA: Pacific Northwest National Laboratory. Nuclear Energy Critical Material Waste Minimization Enabled by AM Techniques

2023

  • Balusu K., H. Das, X. Li, T.J. Roosendaal, R.J. Seffens, A. Soulami, and P. Upadhyay. 2023. "THE ROLE OF FRACTURE PROPERTIES ON LAP JOINT STRENGTH OF FRICTION STIR WELDED AA7055-T6 SHEETS." In TMS 2023: Friction Stir Welding and Processing XII Symposium held at the TMS Annual Meeting and Exhibition, March 19-23, 2023. San Diego, CA. Minerals, Metals and Materials Series, edited by Y. Hovanksi, et al, 193–205. Cham:Springer. PNNL-SA-178514. doi:10.1007/978-3-031-22661-8_18
  • Balusu K., L. Li, K. Choi, and A. Soulami. 2023. "COUPLING SMOOTHED PARTICLE HYDRODYNAMICS WITH FINITE ELEMENT METHOD TO SIMULATE RESIDUAL STRESSES FROM FRICTION STIR PROCESSING." In ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), October 30-November 3, 2022, Columbus, OH,, IMECE2022-93695, V009T12A040. New York, New York:ASME. PNNL-SA-173252. doi:10.1115/IMECE2022-93695
  • Bhowmik S., P. Varshney, O. El-Atwani, S.A. Maloy, K. Kandasamy, and N. Kumar. 2023. "Assessing Manufacturability of the Oxide Dispersion Strengthened (ODS) 14YWT Alloy Fuel Cladding Tube Using SolidStir™ Technology." In TMS 2023: Friction Stir Welding and Processing XII Symposium held at the TMS Annual Meeting and Exhibition, March 19-23, 2023. San Diego, CA. Minerals, Metals and Materials Series, edited by Y. Hovanksi, et al, 89–98. Cham:Springer. PNNL-SA-182946. doi:10.1007/978-3-031-22661-8_8
  • Das H., X. Li, L. Li, B.J. Schuessler, N.R. Overman, J.T. Darsell, and P. Upadhyay, et al. 2023. "An innovative and alternative approach toward gear fabrication." Journal of Manufacturing Processes 102. PNNL-SA-184447. doi:10.1016/j.jmapro.2023.07.050
  • Escobar J.D., B.S. Taysom, G.J. Grant, S.A. Whalen, A. Soulami, and L. Li. 2023. Sensing and Control During Bulk SPP. PNNL-34995. Richland, WA: Pacific Northwest National Laboratory. Sensing and Control During Bulk SPP
  • Escobar J.D., J.A. Silverstein, F. Ishrak, L. Li, A. Soulami, S. Li, and A. Yu, et al. 2023. "Microstructural evolution in shear-punch tests: A comparative study of pure Cu and Cu-Cr alloy." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 886. PNNL-SA-189843. doi:10.1016/j.msea.2023.145715
  • Fiedler K.R., M.J. Olszta, K.H. Yano, C.M. Doty, D.F. Hopkins, S.M. Akers, and S.R. Spurgeon. 2023. "Evaluating Stage Motion for Automated Electron Microscopy." Microscopy and Microanalysis 29, no. 6:1931–1939. PNNL-SA-180645. doi:10.1093/micmic/ozad108
  • Frazier W.E., K. Kalia, C. Wang, K. Choi, D.P. Field, S. Hu, and A. Soulami, et al. 2023. "An Integrated Simulation of Multiple-Pass U-10Mo Alloy Hot Rolling and Static Recrystallization." Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science 54, no. 9:3461–3475. PNNL-SA-170537. doi:10.1007/s11661-023-07077-x
  • Frazier W.E., L. Li, K. Choi, Y. Fu, Z. Xu, V.V. Joshi, and A. Soulami. 2023. "Microstructure-process relationships in monolithic U-10Mo fuel foil single-pass rolling: A parametric simulation study." Journal of Nuclear Materials 576, no. 17:Art. NO. 154271. PNNL-SA-170389. doi:10.1016/j.jnucmat.2023.154271
  • Guillen D., M.B. Toloczko, R. Prabhakaran, Y. Zhu, Y. Lu, and Y. Wu. 2023. "Thermomechanical Properties of Neutron Irradiated Al3Hf-Al Thermal Neutron Absorber Materials." Materials 16, no. 16:Art. No. 5518. PNNL-SA-131070. doi:10.3390/ma16165518
  • Haag J.V., J. Wang, K. Kruska, M.J. Olszta, C.H. Henager, D.J. Edwards, and W. Setyawan, et al. 2023. "Investigation of interfacial strength in nacre-mimicking tungsten heavy alloys for nuclear fusion applications." Scientific Reports 13, no. 1:Art. No. 575. PNNL-SA-176914. doi:10.1038/s41598-022-26574-4
  • Hartmann T., P.K. Thallapally, and I. van Rooyen. 2023. Strategic Plan: Decrease critical minerals waste through enabling advanced manufacturing techniques. PNNL-34225. Richland, WA: Pacific Northwest National Laboratory. Strategic Plan: Decrease critical minerals waste through enabling advanced manufacturing techniques
  • Huber Z.F., E.R. Conte, C.A. Lavender, J. Fornof, E. Shaber, A. Mushakov, and J. Johnson, et al. 2023. Casting and Characterization of U-50Zr. PNNL-33873. Richland, WA: Pacific Northwest National Laboratory. Casting and Characterization of U-50Zr
  • Kautz E.J., A. Zelenyuk-Imre, B. Gwalani, M.J. Olszta, M.C. Phillips, M. Manard, and C. Kimblin, et al. 2023. "Impact of environmental oxygen on nanoparticle formation and agglomeration in aluminum laser ablation plumes." Journal of Chemical Physics 159, no. 17:174303. PNNL-SA-187179. doi:10.1063/5.0167400
  • Kautz E.J., M. Song, S.L. Riechers, A.M. Koziol, S.A. Briggs, K.H. Yano, and R. Prabhakaran, et al. 2023. "Influence of processing on secondary phase formation and microstructural evolution at U-10Mo alloy and Zr interlayer interfaces." Journal of Alloys and Compounds 969. PNNL-SA-182384.
  • Kim M., J. Yu, S. Shin, H.M. Johnson, R.K. Motkuri, and P.K. Thallapally. 2023. "Enhanced Iodine Capture Using a Postsynthetically Modified Thione-Silver Zeolitic Imidazole Framework." ACS Applied Materials & Interfaces 15, no. 47:54702-54710. PNNL-SA-191914. doi:10.1021/acsami.3c13800
  • Kim M., S.K. Nune, J. Yu, J. Liu, and P.K. Thallapally. 2023. Extending Magnetic Core Shell Nanoparticle Extraction Technology to Cesium and Antimony Removal from Geothermal Brines in New Zealand. PNNL-34393. Richland, WA: Pacific Northwest National Laboratory. Extending Magnetic Core Shell Nanoparticle Extraction Technology to Cesium and Antimony Removal from Geothermal Brines in New Zealand
  • Koziol A.M., K.H. Yano, A.L. Schemer-Kohrn, A. Soulami, V.V. Joshi, S.A. Briggs, and E.J. Kautz. 2023. "Microstructure and microchemistry changes at U-10Mo fuel/AA6061 cladding interfaces with varying hot isostatic pressing conditions." Journal of Nuclear Materials 585. PNNL-SA-181312. doi:10.1016/j.jnucmat.2023.154597
  • Liu T., C. Li, M.J. Olszta, J. Tao, and A. Devaraj. 2023. "Directly Monitoring the Shift in Corrosion Mechanisms of a Model FeCrNi Alloy Driven by Electric Potential." npj Materials Degradation 7. PNNL-SA-179549. doi:10.1038/s41529-023-00357-2
  • Nasim W., S.S. Kulkarni, A. Soulami, M. Efe, and A. Rohatgi. 2023. "Room Temperature Stamping of High-strength Aluminum for Light-weight Structural Automotive Components." Journal of Materials Engineering and Performance 33. PNNL-SA-169384. doi:10.1007/s11665-023-08810-8
  • Pole M., Z. Lu, T. Ajantiwalay, M.J. Olszta, S. Tripathi, A. Yu, and H.S. Mehta, et al. 2023. "Modes of Strain Accommodation in Cu-Nb Nanolayered Thin Film on Indentation and Cyclic Shear." Surfaces and Interfaces 37. PNNL-SA-179422. doi:10.1016/j.surfin.2023.102712
  • Ronnebro E.C., M.H. Engelhard, D.J. Edwards, K. Grubel, A.D. Guzman, and R.T. Storms. 2023. "Evaluation of Hydrogen Gettering Rates Correlated to Surface Composition and Texture of Nickel-Plated Zircaloy Getters of Different Heat Treatment Procedures." Molecules 28, no. 2:Art. No. 762. PNNL-SA-180613. doi:10.3390/molecules28020762
  • Roy A., D.J. Senor, D.J. Edwards, A.M. Casella, and R. Devanathan. 2023. "Insights into radiation resistance of titanium alloys from displacement cascade simulations." Journal of Nuclear Materials 586. PNNL-SA-183956. doi:10.1016/j.jnucmat.2023.154695
  • Srivastava A., H. Das, D. Ramirez Tamayo, L. Li, M. Pole, B. Gwalani, and A. Soulami, et al. 2023. "Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel." International Journal of Advanced Manufacturing Technology 128, no. 7-8:2899–2911. PNNL-SA-180851. doi:10.1007/s00170-023-12111-8
  • Taufique M., I. van Rooyen, S. Biswas, M. Mcmurtrey, M. Swisher, M. Messner, and S. Mantri, et al. 2023. MDDC Multi-Length Scale Data Architecture Contribution Report – PNNL, INL, ANL, LANL and ORNL. PNNL-35009. Richland, WA: Pacific Northwest National Laboratory. MDDC Multi-Length Scale Data Architecture Contribution Report – PNNL, INL, ANL, LANL and ORNL
  • van Rooyen I., A. Soulami, L. Li, M. Nartu, S. Meher, J.B. Wierschke, and J. Fernandez dos Santos, et al. 2023. Preliminary HEA Solid Phase Processing Development Report. PNNL-34986. Richland, WA: Pacific Northwest National Laboratory. Preliminary HEA Solid Phase Processing Development Report
  • van Rooyen I., C.W. Enderlin, E.J. Ponce, A. Soulami, T. Hartmann, S. Meher, and V.V. Joshi, et al. 2023. Qualification Framework Evaluations, Status Quo, and Recommendations. PNNL-35024. Richland, WA: Pacific Northwest National Laboratory. Qualification Framework Evaluations, Status Quo, and Recommendations
  • van Rooyen I., S. Meher, J. Fernandez dos Santos, M. Komarasamy, M. Nartu, J.B. Wierschke, and R. Prabhakaran, et al. 2023. Feasibility Evaluation of a Solid Phase Scalable HEA Cladding Manufacturing Route. PNNL-35499. Richland, WA: Pacific Northwest National Laboratory. Feasibility Evaluation of a Solid Phase Scalable HEA Cladding Manufacturing Route
  • Vo H., S. Pal, N. Almirall, S.J. Tumey, G. Odette, S.A. Maloy, and P. Hosemann. 2023. "Dose and dose rate effects on the microstructural and mechanical stability of long-range ordered precipitates in Inconel 718." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 870. PNNL-SA-182929. doi:10.1016/j.msea.2023.144916
  • Weiser M., M.J. Olszta, M.H. Engelhard, Z. Zhu, and D.K. Schreiber. 2023. "Visualizing oxygen transport pathways during intergranular oxidation in Ni-Cr." npj Materials Degradation 7. PNNL-SA-182252. doi:10.1038/s41529-023-00387-w
  • Yang Y., W. Zhou, S. Yin, S.Y. Wang, Q. Yu, M.J. Olszta, and Y. Zhang, et al. 2023. "One dimensional wormhole corrosion in metals." Nature Communications 14, no. 1:Art. No. 988. PNNL-SA-181843. doi:10.1038/s41467-023-36588-9
  • Zhuang B., B. Gencturk, I. Asareh, A. Oberai, H. Ramaswamy, R.M. Meyer, and M.S. Good, et al. 2023. "Development and Experimental Verification of an Active Noise Cancellation (ANC) Method for Non-Invasive Sensing." Mechanical Systems and Signal Processing 196. PNNL-SA-180963. doi:10.1016/j.ymssp.2023.110330

2022

  • Agarwal S., M. Butterling, M.O. Liedke, K.H. Yano, D.K. Schreiber, A.C. Jones, and B.P. Uberuaga, et al. 2022. "The mechanism behind the high radiation tolerance of Fe-Cr alloys." Journal of Applied Physics 131, no. 12:Art. No. 125903. PNNL-SA-164885. doi:10.1063/5.0085086
  • Andrews H., P.K. Thallapally, and A.J. Robinson. 2022. "Monitoring Xenon Capture in a Metal Organic Framework using a Laser-Induced Breakdown Spectroscopy." Micromachines 14, no. 1:Art. No. 82. PNNL-SA-180335. doi:10.3390/mi14010082
  • Escobar J.D., B. Gwalani, M.J. Olszta, J.A. Silverstein, T. Ajantiwalay, N.R. Overman, and W. Fu, et al. 2022. "Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy." Journal of Alloys and Compounds 928. PNNL-SA-177343. doi:10.1016/j.jallcom.2022.167007
  • Fu Y., W.E. Frazier, K. Choi, L. Li, Z. Xu, V.V. Joshi, and A. Soulami. 2022. "Prediction of Grain Structure after Thermomechanical Processing of U-10Mo Alloy using Sensitivity Analysis and Machine Learning Surrogate Model." Scientific Reports 12. PNNL-SA-170738. doi:10.1038/s41598-022-14731-8
  • Gigax J.G., M. Chancey, D. Xie, H. Kim, Y. Wang, S.A. Maloy, and N. Li. 2022. "A Novel Microshear Geometry for Exploring the Influence of Void Swelling on the Mechanical Properties Induced by MeV Heavy Ion Irradiation." Materials 15, no. 12:Art. No. 4253. PNNL-SA-174778. doi:10.3390/ma15124253
  • Gwalani B., J. Liu, S.M. Lambeets, M.J. Olszta, J. Poplawsky, A. Shyam, and A. Devaraj. 2022. "Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development." Materials Research Letters 10, no. 12:771-779. PNNL-SA-172603. doi:10.1080/21663831.2022.2102947
  • Gwalani B., Q. Pang, A. Yu, W. Fu, L. Li, M. Pole, and C.J. Roach, et al. 2022. "Extended Shear Deformation of the Immiscible Cu-Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties." ACS Omega 7, no. 16:13721-13736. PNNL-SA-169151. doi:10.1021/acsomega.1c07368
  • Hartmann T., S.A. Maloy, and I. van Rooyen. 2022. Draft Critical Minerals Evaluation Report: Advanced Materials and Manufacturing Technology. PNNL-33356. Richland, WA: Pacific Northwest National Laboratory. Draft Critical Minerals Evaluation Report: Advanced Materials and Manufacturing Technology
  • Huber Z.F., E.R. Conte, M.A. Rossiter, A. Soulami, K.P. Brooks, C.L. Painter, and V.V. Joshi, et al. 2022. "A Robust Processing Approach for Producing Highly Loaded Dispersion Fuels." In Proceedings of the 42nd International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR 2022), October 3-5, 2022, Vienna, Austria, Paper No. S5-P2. Lemont, Illinois:Argonne National Laboratory. PNNL-SA-178158.
  • Kalsar R., B.J. Schuessler, A. Soulami, and V.V. Joshi. 2022. PNNL's Characterization Summary for MP-2 Experiment. PNNL-33787. Richland, WA: Pacific Northwest National Laboratory. PNNL's Characterization Summary for MP-2 Experiment
  • Kruska K., Z. Zhai, B.J. Riley, M.J. Olszta, and D.K. Schreiber. 2022. "Effect of Applied Stress on the Selective Oxidation of Alloy 600 Exposed to PWR Primary Water and Rhines Pack Environments." In Proceedings of the 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, July 17-21, 2022, Snowmass, CO, ED22-17328-SG. Pittsburgh, Pennsylvania:Association for Materials Protection and Performance. PNNL-SA-174340.
  • Li L., A.A. Fortier, D. Ramirez Tamayo, V.V. Joshi, and A. Soulami. 2022. "Minimizing thickness variation in monolithic U-10Mo fuel foil and Zr interlayer during hot rolling: A microstructure-based finite element method analysis." Materials Today Communications 32. PNNL-SA-168343. doi:10.1016/j.mtcomm.2022.103910
  • Li L., M. Reza E Rabby, N.R. Overman, T. Wang, S.A. Whalen, G.J. Grant, and S.N. Mathaudhu, et al. 2022. "Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method." Materials & Design 221. PNNL-SA-173428. doi:10.1016/j.matdes.2022.111010
  • Li S., L. Li, A. Soulami, C.A. Powell, S. Mathaudhu, A. Devaraj, and C. Wang. 2022. "In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending." Materials Research Letters 10, no. 7:488-495. PNNL-SA-169389. doi:10.1080/21663831.2022.2057201
  • Li X., T. Wang, X. Ma, N.R. Overman, S.A. Whalen, D.R. Herling, and K.S. Kappagantula. 2022. "Manufacture aluminum alloy tube from powder with a single-step extrusion via ShAPE." Journal of Manufacturing Processes 80. PNNL-SA-169412. doi:10.1016/j.jmapro.2022.05.060
  • Ma X., M.J. Olszta, J. Liu, M. Song, M. Pole, M. Pallaka, and J.A. Silverstein, et al. 2022. "Temperature-dependent formation of gradient structures with anomalous hardening in an Al-Si alloy." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 858. PNNL-SA-172014. doi:10.1016/j.msea.2022.144061
  • Mason C., K. Choi, A. Soulami, K.I. Johnson, K.P. Brooks, N.K. Karri, and V.V. Joshi. 2022. "Computational Modeling of Multi-Pass Rolling Parameters Effect on Resulting Fuel Foil Shape." In Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), October 30-November 3, 2022, Columbus, OH, IMECE2022-95081, V006T08A047. New York, New York:ASME. PNNL-SA-172583. doi:10.1115/IMECE2022-95081
  • McNamara B.K., M.J. O'Hara, S.S. Morrison, C.Z. Soderquist, A.M. Casella, R.A. Clark, and R. Carter. 2022. "Separations of U/Pu and Np/Pu using fluoride volatility." Journal of Fluorine Chemistry 257–258. PNNL-SA-168450. doi:10.1016/j.jfluchem.2022.109952
  • Meyer R.M., A.E. Holmes, R. Morales Rosado, I. Virkkunen, T. Seuaciuc-Osorio, and B.P. Lin. 2022. "RESULTS OF A VIRTUAL ROUND ROBIN STUDY TO ESTIMATE PROBABILITY OF DETECTION FOR DISSIMILAR METAL WELDS." In 48th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2021), July 28-30, 2021, Virtual, Online, Art. No. v001t14a004. New York, New York:American Society of Mechanical Engineers. PNNL-SA-165119.
  • Mukherjee T., T. Debroy, T.J. Lienert, S.A. Maloy, C. Lear, and P. Hosemann. 2022. "Tempering kinetics during multilayer laser additive manufacturing of a ferritic steel." Journal of Manufacturing Processes 83. PNNL-SA-177178. doi:10.1016/j.jmapro.2022.08.061
  • Olszta M.J., K. Kruska, D.J. Edwards, D.K. Schreiber, and P. Chou. 2022. "Examination Of IASCC In 304 Stainless Steel Core Shroud From A Commercial Boiling Water Reactor (BWR)." In Proceedings of the 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, July 17-21, 2022, Snowmass, CO, ED22-18366-SG. Pittsburgh, Pennsylvania::Association for Materials Protection and Performance. PNNL-SA-171492.
  • Peles A., S.A. Whalen, and G.J. Grant. 2022. Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing. PNNL-32875. Richland, WA: Pacific Northwest National Laboratory. Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing
  • Pitike K., H. Ke, D.J. Edwards, and W. Setyawan. 2022. "Helium interaction with solutes and impurities in neutron-irradiated nanostructured ferritic alloys: A first principles study." Journal of Nuclear Materials 566. PNNL-SA-169716. doi:10.1016/j.jnucmat.2022.153771
  • Prabhakaran R., G.W. Coffey, O.A. Marina, J.S. Hardy, D.J. Edwards, and A.M. Casella. 2022. Final Report: Improved Understanding of Zircaloy Hydrogen Pickup Mechanisms in BWRs. NSUF Report. PNNL-32984. Richland, WA: Pacific Northwest National Laboratory. Final Report: Improved Understanding of Zircaloy Hydrogen Pickup Mechanisms in BWRs. NSUF Report
  • Ramirez Tamayo D., A. Soulami, V. Gupta, D. Restrepo, A. Montoya, E.K. Nickerson, and T.J. Roosendaal, et al. 2022. "A Complex-variable Finite Element Method-based Inverse Methodology to Extract Constitutive Parameters using Experimental Data." International Journal of Solids and Structures 243. PNNL-SA-165968. doi:10.1016/j.ijsolstr.2022.111545
  • Royer J.I., S. Shahrezaei, A. Soulami, K.P. Brooks, M.T. Athon, Z.F. Huber, and M.A. Rhodes, et al. 2022. Hot Forging Options for Thick Castings. PNNL-34151. Richland, WA: Pacific Northwest National Laboratory. Hot Forging Options for Thick Castings
  • Schreiber D.K., K. Kruska, M.J. Olszta, and P. Chou. 2022. "Intergranular Oxidation of Unstressed Alloy 600 SA and Alloy 600TT in PWR Primary Water." In Proceedings of the 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, July 17-21, 2022, Snowmass, CO, ED22-17279-SG. Pittsburgh, Pennsylvania:Association for Materials Protection and Performance. PNNL-SA-178120.
  • Shahrezaei S., A. Soulami, B.J. Schuessler, R. Kalsar, and V.V. Joshi. 2022. Microstructural Characterization of As-Cast MP-1 Experiment U-10Mo Alloy. PNNL-32860. Richland, WA: Pacific Northwest National Laboratory. Microstructural Characterization of As-Cast MP-1 Experiment U-10Mo Alloy
  • Shimskey R.W., K. Adams, T.C. Kaspar, L.E. Sweet, M.J. Olszta, J.B. Lang, and Z.F. Huber. 2022. Alternate Methods for Cleaning Zirconium Plate. PNNL-32829. Richland, WA: Pacific Northwest National Laboratory. Alternate Methods for Cleaning Zirconium Plate
  • Weiser M., D.K. Schreiber, K. Kruska, M.H. Engelhard, and M.J. Olszta. 2022. "Intergranular oxidation and oxygen transport in Ni-20Cr during exposure to model dry and wet oxidation environments." In Proceedings of the 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor Meeting, July 17-21, 2022, Snowmass Village, CO, Paper No. ED22-17329-SG. Houston, Texas:Association for Materials Protection and Performance (AMPP). PNNL-SA-177909.

2021

  • Burkes D., I.J. Schwerdt, T.K. Huber, H. Breitkreutz, C. Reiter, W. Petry, and J. Schulthess, et al. 2021. "Thermal properties of U-Mo alloys irradiated under high fission power density." Journal of Nuclear Materials 547. PNNL-SA-154644. doi:10.1016/j.jnucmat.2021.152823
  • Frazier W.E., V.V. Joshi, N.R. Overman, M.A. Rhodes, T.J. Roosendaal, R.J. Seffens, and E.K. Nickerson, et al. 2021. Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE). PNNL-32477. Richland, WA: Pacific Northwest National Laboratory. Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE)
  • Haag J., D.J. Edwards, C.H. Henager, W. Setyawan, J. Wang, and M. Murayama. 2021. "Characterization of Ductile Phase Toughening Mechanisms in a Hot-Rolled Tungsten Heavy Alloy." Acta Materialia 204. PNNL-SA-155373. doi:10.1016/j.actamat.2020.116523
  • Jana S., M.J. Olszta, D.J. Edwards, M.H. Engelhard, A. Samanta, H. Ding, and P. Murkute, et al. 2021. "Microstructural basis for improved corrosion resistance of laser surface processed AZ31 Mg alloy." Corrosion Science 191. PNNL-SA-156519. doi:10.1016/j.corsci.2021.109707
  • Li S., M.J. Olszta, L. Li, B. Gwalani, A. Soulami, C.A. Powell, and S. Mathaudhu, et al. 2021. "In-situ TEM Observation of Shear Induced Microstructure Evolution in Cu-Nb Alloy." Scripta Materialia 205, no. 2021:114214. PNNL-SA-165104. doi:10.1016/j.scriptamat.2021.114214
  • Meyer R.M., J.B. Renshaw, J. Beard, J. Tatman, M. Keene, P. Plante, and N. Fales, et al. 2021. "IN-SERVICE INSPECTION OF EXTENDED DRY STORAGE OF SPENT NUCLEAR FUEL, PART I: CRAWLER TECHNOLOGY DEVELOPMENT." In Proceedings of the ASME Pressure Vessels & Piping Conference (PVP 2021), July 13-15, 2021, Virtual, Online, Paper No: PVP2021-62058, V005T09A007. New York, New York:ASME. PNNL-SA-159112. doi:10.1115/PVP2021-62058
  • Meyer R.M., J.B. Renshaw, K. Hunter, M. Orihuela, J. Stadler, K. Mauskar, and U. Wolf, et al. 2021. "INSERVICE INSPECTION OF EXTENDED DRY STORAGE OF SPENT NUCLEAR FUEL, PART II: NDE/SENSOR TECHNOLOGY DEVELOPMENT AND CODIFICATION." In Proceedings of the ASME Pressure Vessels & Piping Conference (PVP 2021), July 13-15, 2021, Virtual, Online, 5, Paper No: PVP2021-62069, V005T09A008. New York, New York:ASME. PNNL-SA-159194. doi:10.1115/PVP2021-62069
  • Scheele R.D., B.D. Hanson, and A.M. Casella. 2021. "Effect of Added Gadolinium Oxide on the Thermal Air Oxidation of Uranium Dioxide." Journal of Nuclear Materials 552. PNNL-SA-158705. doi:10.1016/j.jnucmat.2021.153008
  • Wakai E., S. Takaya, Y. Matsui, Y. Nagae, S. Kato, T. Suzudo, and M. Yamaguchi, et al. 2021. "Irradiation Damages of Structural Materials under Different Irradiation Environments." Journal of Nuclear Materials 543. PNNL-SA-155977. doi:10.1016/j.jnucmat.2020.152503
  • Yano K.H., A. Kohnert, A. Banerjee, D.J. Edwards, E. Holby, T.C. Kaspar, and H. Kim, et al. 2021. "Radiation-Enhanced Anion Transport in Hematite." Chemistry of Materials 33, no. 7:2307-2318. PNNL-SA-157643. doi:10.1021/acs.chemmater.0c04235

2020

  • Derby B., J. Cooper, T.G. Lach, E. Martinez, H. Kim, J.K. Baldwin, and D. Kaoumi, et al. 2020. "A pathway to synthesizing single-crystal Fe and FeCr films." Surface & Coatings Technology 403. PNNL-SA-155711. doi:10.1016/j.surfcoat.2020.126346
  • Ishida T., E. Wakai, S. Makimura, A.M. Casella, D.J. Edwards, R. Prabhakaran, and D.J. Senor, et al. 2020. "Tensile behavior of dual-phase titanium alloys under high-intensity proton beam exposure: radiation-induced omega phase transformation in Ti-6Al-4V." Journal of Nuclear Materials 541. PNNL-SA-152944. doi:10.1016/j.jnucmat.2020.152413
  • Ishida T., E. Wakai, S. Makimura, P. Hurh, K. Ammigan, A.M. Casella, and D.J. Edwards, et al. 2020. "Radiation Damage Studies on Titanium Alloys as High Intensity Proton Accelerator Beam Window Materials." In Proceedings of the 14th International Workshop on Spallation Materials Technology, November 11-16, 2018, Fukushima, Japan. JPS Conference Proceedings, 28, 041001. Tokyo:The Physical Society of Japan. PNNL-SA-167289. doi:10.7566/JPSCP.28.041001

Energy and Environment

Core Research Areas

Contacts