Skip to Main Content U.S. Department of Energy
Energy and Environment Directorate

Judith Bamberger

Judith Bamberger

Pacific Northwest National Laboratory
PO Box 999
Richland, WA 99352
(509) 375-3898

Biography

Over the course of her career at Pacific Northwest National Laboratory Ms. Bamberger has been involved in a wide range of research topics ranging from multi-phase flow characterization to aerosol physics. For the past decade Ms. Bamberger's research in multi-phase flow has focused on development and application of in-situ real-time instrumentation to characterize physical and rheological properties of particulate-laden fluids and multi-phase suspensions in both vessels and pipelines. Low power ultrasound is used to efficiently interrogate opaque suspensions. She is currently developing and deploying ultrasonic sensing systems to characterize density and concentration of inorganic solids in nuclear waste slurries, to characterize hydrates properties during drilling operations and settling of inorganic solids. She has expertise in the design and conduction of experimental studies and their subsequent analysis to characterize the performance of fluid, thermal hydraulic, and aerosol systems. As program integrator and technical contributor she has directed and contributed to field and laboratory experimental evaluations, hardware and test section design and development, state-of-the-art instrumentation system development, and data analysis.

Education and Credentials

  • Ph.D., Mechanical Engineering, Washington State University
  • P.E., Professional Engineer, State of Washington
  • M.S., Mechanical Engineering, The Pennsylvania State University
  • B.S., Physics and Chemistry, Dickinson College

Awards and Recognitions

  • 2005, American Society of Mechanical Engineers Dedicated Service Award

PNNL Publications

2023

  • Bamberger J.A., L.F. Pease, J.E. Serkowski, M.J. Minette, and C. Burns. 2023. "Comparing Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Full and Tapered Bump Arrays." In Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, October 29-November 2, 2023, New Orleans, LA, 9: Fluids Engineering, Paper No: IMECE2023-110897, V009T10A041. New York, New York:ASME. PNNL-SA-184603. doi:10.1115/IMECE2023-110897
  • Minette M.J., C. Burns, N. Phillips, C.L. Davidson, J.A. Bamberger, J.E. Serkowski, and L.F. Pease. 2023. "Targeted Particle Fractionation Technologies: Proof of Concept." In Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, October 29-November 2, 2023, New Orleans, LA, 9: Fluids Engineering, Paper No: IMECE2023-110684, V009T10A046. New York Mls, New York:ASME. PNNL-SA-184841. doi:10.1115/IMECE2023-110684

2022

  • Bamberger J.A., L.F. Pease, C. Burns, and M.J. Minette. 2022. "Separating Oil-Water Mixtures Using Bump Arrays." In Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), October 30-November 3, 2022, Columbus, OH, IMECE2022-95920, V008T10A039. New York, New York:ASME. PNNL-SA-172341. doi:10.1115/IMECE2022-95920
  • Bamberger J.A., L.F. Pease, J.E. Serkowski, M.J. Minette, and C. Burns. 2022. "Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Tapered Bump Arrays." In Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), October 30-November 3, 2022, Columbus, OH, IMECE2022-94469, V008T10A027. New York, New York:ASME. PNNL-SA-172553. doi:10.1115/IMECE2022-94469
  • Pease L.F., J.A. Bamberger, and M.J. Minette. 2022. "Critical Shear Stress for Erosion Under Laminar Jet Flow." In ASME International Mechanical Engineering Congress and Exposition (IMECE 2021), November 1-5, 2021, Virtual, Online, 10: Fluids Engineering, Paper No: IMECE2021-67639, V010T10A033. New York City, New York:American Society of Mechanical Engineers. PNNL-SA-159608. doi:10.1115/IMECE2021-67639
  • Pease L.F., J.A. Bamberger, and M.J. Minette. 2022. "JET EROSION OF PARTICLE BEDS: PROJECTING CRITICAL SUSPENSION VELOCITIES FROM EFFECTIVE CLEARING / CLEANING RADII." In Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting (FEDSM 2022), August 1-3, 2022, Toronto, Canada, 2: Multiphase Flow, Paper No: FEDSM2022-85965, V002T04A003. New York, New York:ASME. PNNL-SA-170452. doi:10.1115/FEDSM2022-85965
  • Pease L.F., L.A. Mahoney, S.T. Yokuda, J.A. Bamberger, and M.J. Minette. 2022. "Evaluation of Entropy Driven Jet Symmetry Transitions." Scientific Reports 12, no. 1:Art. No. 13230. PNNL-SA-138470. doi:10.1038/s41598-022-13161-w

2021

  • Pease L.F., J.A. Bamberger, and M.J. Minette. 2021. "Attached and Attaching Three-Dimensional Jets from Circular Nozzles: Analytical Model." Journal of Fluids Engineering--Transactions of the ASME 143, no. 3:034503. PNNL-SA-153350. doi:10.1115/1.4049045
  • Pease L.F., J.A. Bamberger, C. Burns, and M.J. Minette. 2021. "LARGE PARTICLE SEPARATION FROM NON-NEWTONIAN SLURRIES USING BUMP ARRAYS." In Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting (FEDSM 2021), August 10-12, 2021, Virtual, Online, 3, FEDSM2021-65904, V003T08A023. New York, New York:ASME. PNNL-SA-159468. doi:10.1115/FEDSM2021-65904
  • Pease L.F., J.E. Serkowski, T.G. Veldman, J. Williams, X. Yu, M.J. Minette, and J.A. Bamberger, et al. 2021. "Can Bump Arrays Separate Particles from Turbulent Flows?." In Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting (FEDSM 2021), August 10-12, 2021, Virtual, Online, 3, FEDSM2021-67696, V003T08A024. New York, New York:ASME. PNNL-SA-153733. doi:10.1115/FEDSM2021-67696

2020

  • Bamberger J.A., and B.A. Napier. 2020. Transfer Factors for the FRMAC Assessment Manual and Turbo FRMAC to Improve Radiological Dose Assessment. PNNL-27926 Rev. 1. Richland, WA: Pacific Northwest National Laboratory. Transfer Factors for the FRMAC Assessment Manual and Turbo FRMAC to Improve Radiological Dose Assessment
  • Enderlin C.W., J.A. Bamberger, and M.J. Minette. 2020. "Evaluating Transfer and Pumping of Slurries from Pulsed Jet Mixed Vessels." In Proceedings of the ASME 2020 Fluids Engineering Division Summer Meeting FEDSM2020 July 13-16, 2020, Orlando, Florida, USA, 2, Paper No: FEDSM2020-20390, V002T04A031. New York, New York:ASME. PNNL-SA-152678. doi:10.1115/FEDSM2020-20390
  • Pease L.F., and J.A. Bamberger. 2020. "Attached Jet Velocity Profiles in Mixing Tanks." In Proceedings of the ASME 2020 Fluids Engineering Division Summer Meeting FEDSM2020 July 13-16, 2020, Orlando, Florida, USA, 2, Paper No: FEDSM2020-20220, V002T03A039. New York, New York:ASME. PNNL-SA-150572. doi:10.1115/FEDSM2020-20220
  • Pease L.F., J.A. Bamberger, and M.J. Minette. 2020. "Implications of Non-Bingham Rheology." In Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exhibition November 11-14, 2019 Salt Lake City, UT, 7, Paper No: IMECE2019-11841, V007T08A029. New York, New York:ASME. PNNL-SA-142881. doi:10.1115/IMECE2019-11841
  • Pease L.F., M.J. Minette, and J.A. Bamberger. 2020. "Radial Wall Jet Flow Over Sigmoidal Surfaces." In Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition IMECE2020 November 16-19, 2020, Virtual, Online, 10, Paper No: IMECE2020-24058, V010T10A017. New York, New York:ASME. PNNL-SA-153394. doi:10.1115/IMECE2020-24058

2019

  • Cullinan V.I., L.A. Mahoney, T.M. Brouns, S.K. Nune, J.A. Bamberger, C.K. Clayton, and L.F. Pease, et al. 2019. BY-110 Headspace Sampling Comparison Test. PNNL-28801 Vol. 1. Richland, WA: Pacific Northwest National Laboratory. BY-110 Headspace Sampling Comparison Test
  • Pease L.F., A. Fuher, J.A. Bamberger, C. Burns, R.C. Daniel, and M.J. Minette. 2019. "Is Radioactive Tank Waste a Bingham Fluid?." In Proceedings of the ASME-JSME-KSME 2019 Joint Fluids Engineering Conference, AJKFLUIDS2019, July 28-August 1, 2019, San Francisco, CA. New York, New York:American Society of Mechanical Engineers. PNNL-SA-142356. doi:10.1115/AJKFluids2019-5216
  • Pease L.F., K.K. Anderson, J.A. Bamberger, and M.J. Minette. 2019. "Statistics for Testing Under Adverse Conditions." Journal of Verification, Validation and Uncertainty Quantification 4, no. 2:Art. No. 021007; Paper No: VVUQ-18-1037. PNNL-SA-138318. doi:10.1115/1.4045117

2017

  • Bamberger J.A., and J.A. Glissmeyer. 2017. "Release Fractions from Airborne Fluid and Slurry Spills." In Proceedings of the 14th International Congress of the International Radiation Protection Association. PNNL-SA-122721.
  • Bamberger J.A., L.F. Pease, and M.J. Minette. 2017. "Solids Erosion Patterns Developed by Pulse Jet Mixers." In ASME 2017 Fluids Engineering Division Summer Meeting, Symposium on Fluid Measurement and Instrumentation, July 30-August 3, 2017, Waikoloa, Hawaii, 1B, V01BT06A012; Paper No. FEDSM2017-69382. New York, New York:American Society of Mechanical Engineers. PNNL-SA-122491. doi:10.1115/FEDSM2017-69382

2016

  • Bamberger J.A., and C.W. Enderlin. 2016. "Experimental Evaluation of Dual-Opposed Jet Mixer Pump Performance for Slurry Mixing." In ASME 2016 Fluids Engineering Division Summer Meeting (FEDSM2016), July 10-14, 2016, Washington, DC, II2, V002T10A002; FEDSM2016-7749. New York, New York:American Society of Mechanical Engineers. PNNL-SA-116470. doi:10.1115/FEDSM2016-7749
  • Pease L.F., J.A. Bamberger, L.A. Mahoney, S.T. Yokuda, and M.J. Minette. 2016. "A Simple Criterion to Estimate Performance of Pulse Jet Mixed Vessels." In Proceedings of the ASME 2016 Fluids Engineering Division Summer Meeting FEDSM2016 July 10-14, 2016, Washington, DC, 1B, V01BT24A004, FEDSM2016-7751. New York, New York:American Society of Mechanical Engineers. PNNL-SA-116485. doi:10.1115/FEDSM2016-7751

2015

  • Bamberger J.A., C.W. Enderlin, M.J. Minette, and L.K. Holton. 2015. "Approach for Configuring a Standardized Vessel for Processing Radioactive Waste Slurries." In ASME-JSME-KSME Joint Fluids Engineering Conference, Forum on Fluid Measurements and Instrumentation, July 26-31, 2015, Seoul, Korea, 2, V002T10A003. New York, New York:American Society of Mechanical Engineering. PNNL-SA-109530. doi:10.1115/AJKFluids2015-10572
  • Bamberger J.A., G.F. Piepel, C.W. Enderlin, B.G. Amidan, and A. Heredia-Langner. 2015. "Experimental and Measurement Uncertainty Associated with Characterizing Slurry Mixing Performance of Pulsating Jets at Multiple Scales." In ASME-JSME-KSME Joint Fluids Engineering Conference, Symposium on Uncertainty Quantification in Flow Measurements and Simulations, July 26-31, 2015, Seoul, Korea, 1, V001T27A002. New York, New York:American Society of Mechanical Engineers. PNNL-SA-109501. doi:10.1115/AJKFluids2015-27575
  • Wells B.E., J.A. Bamberger, K.P. Recknagle, C.W. Enderlin, M.J. Minette, and L.K. Holton. 2015. "Applying Hanford Tank Mixing Data to Define Pulse Jet Mixer Operation." In Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition (IMECE 2015), November 13-19, 2015, Houston, Texas, 7B, Paper No. V07BT09A044. New York, New York:ASME. PNNL-SA-111566. doi:10.1115/IMECE2015-50712

2014

  • Bamberger J.A., and C.W. Enderlin. 2014. "Instrumentation to Monitor Transient Developing Periodic Flow in Newtonian Slurries." In Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 11th International Conference on Nanochannels, Microchannels, and Minichannels (FEDSM2014), August 3-7, 2014, Chicago, Illinois, 2, Paper No. FEDSM2014-22092. New York, New York:American Society of Mechanical Engineers. PNNL-SA-102805. doi:10.1115/FEDSM2014-22092

2013

  • Bamberger J.A. 2013. "Cyclic Concentration Measurements for Characterizing Pulsating Flow." In Proceedings of the ASME 2013 Fluids Engineering Summer Meeting (FEDSM2013), July 7-11, 2013, Incline Village, Nevada, 2, Paper No. FEDSM2013-16458. New York, New York:American Society of Mechanical Engineers. PNNL-SA-94744. doi:10.1115/FEDSM2013-16458
  • Bamberger J.A., and C.W. Enderlin. 2013. "Instrumentation to Monitor Transient Periodic Developing Flow in Non-Newtonian Slurries." In Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE2013 ), November 15-21, 2013, San Diego, California, 7B, Paper No. IMECE2013-65374. New York, New York:American Society of Mechanical Engineers. PNNL-SA-97262. doi:10.1115/IMECE2013-65374
  • Kuhn W.L., D.R. Rector, J.A. Bamberger, and M.J. Minette. 2013. "Physical Attributes of Pulse Jet Mixer Operation." In ASME Fluids Engineering Summer Meeting (FEDSM2013), July 7-11, 2013, Incline Village, Nevada, 2, V002T11A009; Paper No.FEDSM2013-16459. New York, New York:ASME. PNNL-SA-93656. doi:10.1115/FEDSM2013-16459

2012

  • Bamberger J.A. 2012. "Evaluation of Pulse Jet Mixer Concentration Profiles to Track Slurry Suspension." In Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012, Houston, Texas, 2263-2269; Paper No. IMECE2012-88450. New York, New York:ASME. PNNL-SA-89840. doi:10.1115/IMECE2012-88450
  • Bamberger J.A. 2012. "Investigation of Early Dry and Wet/Dry Cooling Studies." In Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012, Houston, Texas, 743-749; Paper No. IMECE2012-88838. New York, New York:ASME. PNNL-SA-89852. doi:10.1115/IMECE2012-88838
  • Bamberger J.A. 2012. "MULTIPHASE FLOW CONCENTRATION CHARACTERIZATION IN SLURRIES DURING PULSE JET MIXING." In Proceedings of the ASME 2012 Fluids Engineering Summer Meeting. July 8-12, 2012, Rio Grande, Puerto Rico, 2: Fora, 279-287; Paper No. FEDSM2012-72466. New York, New York:ASME. PNNL-SA-87561. doi:10.1115/FEDSM2012-72466
  • Bamberger J.A., J.A. Fort, and C.W. Enderlin. 2012. "Solids Mobilization and Suspension by Dual Opposed Mixing Pumps." In Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference, Forum on Fluid Measurements and Instrumentation, July 24-29, 2011, Hamamatsu, Japan, 2, Fora, 97-109; Paper No. AJK2011-31017. New York, New York:ASME. PNNL-SA-79642. doi:10.1115/AJK2011-31017

2011

  • Bamberger J.A., M.J. Minette, P.A. Meyer, J.A. Fort, and E.B. Baer. 2011. "Assessment of Prototypic and Closed Loop Operation during Pulse Jet Mixer Tests with Non-Cohesive Solids to Develop Scale-up Relationships." In Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, 6, 379-391; Paper No. IMECE2011-63793. New York, New York:ASME. PNNL-SA-81986. doi:10.1115/IMECE2011-63793
  • Enderlin C.W., J.R. Bontha, J.A. Bamberger, and F. Nigl. 2011. "NON-NEWTONIAN FLUID CAVERN AND NEWTONIAN CLOUD HEIGHT TESTS TO CHARACTERIZE PULSE JET MIXER OPERATION." In Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference July 24-29, 2011, Hamamatsu, JAPAN, 2, 135-154; Paper No. AJK2011-31025. New York, New York:ASME. PNNL-SA-80105. doi:10.1115/AJK2011-31025

2010

  • Amidan B.G., G.F. Piepel, A. Heredia-Langner, P.A. Meyer, B.E. Wells, J.A. Fort, and J.A. Bamberger, et al. 2010. "A STATISTICAL INTELLIGENCE (STI) APPROACH TO DISCOVERING SPURIOUS CORRELATION IN A PHYSICAL MODEL AND RESOLVING THE PROBLEM WITH AN EXAMPLE OF DESIGNING A PULSE JET MIXING SYSTEM AT HANFORD." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference, July 18-22, 2010, Bellevue, Washington, 6, 1167-1178, Paper No. PVP2010-25817. New York, New York:ASME. PNNL-SA-72274. doi:10.1115/PVP2010-25817
  • Bamberger J.A., and P.A. Meyer. 2010. "Concentration Distributions during Pulse Jet Mixing." In Proceedings of the Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, August 1-5, 2010, Montreal, Canada, Paper No. FEDSM-ICNMM2010-31314. New York, New York:ASME. PNNL-SA-72812.
  • Bamberger J.A., C.W. Enderlin, and S. Tzemos. 2010. "Air Sparging for Mixing Non-Newtonian Slurries." In ASME 2010 International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, Canada, 7, 645-651; Paper No. IMECE2010-40833. New York, New York:ASME. PNNL-SA-73895. doi:10.1115/IMECE2010-40833
  • Bamberger J.A., M.S. Greenwood, B.D. Lawler, S.K. Sundaram, E.B. Baer, B.K. Hatchell, and D.F. Hopkins, et al. 2010. "EVALUATING CONCENTRATION PROFILES DURING UNSTEADY MIXING." In Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009 (IMECE2009), November 13-19, 2009, Lake Buena Vista, Florida, 8, 1-10. New York, New York:American Society of Mechanical Engineers. PNNL-SA-67923.
  • Fort J.A., P.A. Meyer, J.A. Bamberger, C.W. Enderlin, P.A. Scott, M.J. Minette, and P.A. Gauglitz. 2010. "Scaled Testing to Evaluate Pulse Jet Mixer Performance in Waste Treatment Plant Mixing Vessels." In 36th Annual Radioactive Waste Management Symposium, (WM 2010), March 7-11, 2010, Phoenix, AZ, 2, 1405-1419. Tucson, Arizona:Waste Management Symposia, Inc. PNNL-SA-69746.

2009

  • Bamberger J.A., and P.A. Meyer. 2009. "Investigating Using Oscillating Jets for Fluid Mixing." In Proceedings of IMECE2008: International Mechanical Engineering Congress and Exposition Massachusetts, USA, 10, 259-268. New York:ASME. PNNL-SA-61614.
  • Bamberger J.A., M.S. Greenwood, G.W. Morgan, P.A. Meyer, E.B. Baer, M.J. Minette, and P.A. Scott. 2009. "IN SITU MEASUREMENT TECHNIQUES FOR CHARACTERIZING PULSE JET MIXING OF SLURRIES." In Proceedings of the ASME 2009 Fluids Engineering Division Summer Meeting (FEDSM 2009), 2, 57-70. New York, New York:American Society of Mechanical Engineers. PNNL-SA-67102.
  • Bamberger J.A., P.A. Meyer, C.W. Enderlin, J.A. Fort, B.E. Wells, M.J. Minette, and C.A. Burns, et al. 2009. "SCALED EXPERIMENTS EVALUATING PULSE JET MIXING OF SLURRIES." In ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009), November 13-19, 2009, Lake Buena Vista, Florida, USA, 9, 1803-1818. New York, New York:ASME. PNNL-SA-67924. doi:10.1115/IMECE2009-12264

2008

  • Bamberger J.A., P.A. Meyer, J.R. Bontha, J.A. Fort, F. Nigl, J.M. Bates, and C.W. Enderlin, et al. 2008. "EVALUATING PULSE JET MIXING WITH NON-NEWTONIAN SLURRIES." In Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007, 8, 1909-1930. New York, New York:American Society Mechanical Engineers. PNWD-SA-7907.

2007

  • Bamberger J.A., and P.A. Meyer. 2007. "CHARACTERIZING PULSATING MIXING OF SLURRIES." In Proceedings of FEDSM2007 5th Joint ASME/JSME Fluids Engineering Conference July 30-August 2, 2007 San Diego, California USA, 2, 201-205. New York, New York:American Society of Mechanical Engineers. PNNL-SA-55690.

2006

  • Bamberger J.A. 2006. "Using Ultrasound to Characterize Pulp Slurries with Entrained Air." In Proceedings of the ASME Fluids Engineering Division Summer Conference, July 17-20, 2006, Miami, Florida, 2. New York:ASME. PNNL-SA-70228.
  • Greenwood M.S., J.D. Adamson, and J.A. Bamberger. 2006. "Long-Path Measurements of Ultrasonic Attentuation and Velocity for Very Dilute Slurries and Liquids and detection of contaminates." Ultrasonics 44, no. Suppl. 1:e461-e466. PNNL-SA-46354.
  • Meyer P.A., D.E. Kurath, J.A. Bamberger, S.M. Barnes, and A.W. Etchells. 2006. "Scaling Laws for Reduced-Scale Tests of Pulse Jet Mixing Systems in Non-Newtonian Slurries: Mixing Cavern Behavior." In WM'06, the 32nd Waste Management Conference, February 26-March 2, 2006, Tucson, AZ, 14 pages. Tucson, Arizona:WM Symposia, Inc. PNWD-SA-7261.
  • Pfund D.M., M.S. Greenwood, J.A. Bamberger, and R.A. Pappas. 2006. "Inline Ultrasonic Rheometry by Pulsed Doppler." Ultrasonics 44, no. 2006:e477- e482. PNNL-SA-46412. doi:10.1016/j.ultras.2006.05.027

2005

  • Bamberger J.A., and M.S. Greenwood. 2005. "Evaluation of Ultrasonic Methods for In-Situ Real-Time Characterization of Drilling Mud." In Proceedings of FEDSM2005. ASME Fluids Engineering Division Summer Meeting and Exhibition June 19-23, 2005, Houston, TX, USA, 2, 499-504. New York:Amer. Society of Mechanical Engineers. PNNL-SA-45112.

2004

  • Bamberger J.A., and M.S. Greenwood. 2004. "Measuring fluid and slurry density and solids concentration non-invasively." Ultrasonics 42, no. 1-9:563-567. PNNL-SA-40035.
  • Bamberger J.A., and M.S. Greenwood. 2004. "Non-invasive characterization of fluid foodstuffs based on ultrasonic measurements." Food Research International 37. PNWD-SA-6348.
  • Bamberger J.A., and M.S. Greenwood. 2004. "NON-INVASIVE ULTRASONIC INTERROGATION OF DENSE SLURRIES." In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference, July 11-15, 2004, Charlotte, North Carolina, 741-743, Paper No. HT-FED2004-56885. New York, New York:ASME. PNWD-SA-6500. doi:10.1115/HT-FED2004-56885
  • Bamberger J.A., and M.S. Greenwood. 2004. "Using ultrasonic attenuation to monitor slurry mixing in real time." Ultrasonics 42, no. 1-9:145-148. PNNL-SA-40033.
  • Bamberger J.A., D.S. Daly, R.S. Brown, J.A. Vucelick, D.K. Tano, K.K. Anderson, and A.A. Diaz. 2004. "Using Radiofrequency Tags to Assess Mixing in Fluids." In Proceedings of the 16th World Conference on Nondestructive Testing (WCNDT 2004), August 30 - September 2, 2004, Montreal, Canada. Hamilton, :Canadian Institute for Non-Destructive Evaluation. PNWD-SA-6624.
  • Bamberger J.A., L.J. Bond, and M.S. Greenwood. 2004. "REAL-TIME ULTRASONIC CHARACTERIZATION OF FLUIDS AND SLURRIES: PROCESS TECHNIQUES APPLICABLE IN THE OFFSHORE ENVIRONMENT." In ASME 23rd International Conference on Offshore Mechanics and Arctic Engineering, June 20-25 2004, Vancouver, Canada, 3, 883-886, Paper No. OMAE2004-51651. New York, New York:ASME. PNNL-SA-41080. doi:10.1115/OMAE2004-51651
  • Greenwood M.S., and J.A. Bamberger. 2004. "Self-Calibrating Sensor for Measuring Density through Stainless Steel Pipeline Wall." Journal of Fluids Engineering--Transactions of the ASME 126, no. 2:189-192. PNNL-SA-36689. doi:10.1115/1.1677462

2003

  • Bond L.J., M. Morra, M.S. Greenwood, J.A. Bamberger, and R.A. Pappas. 2003. "Ultrasonic Technologies for Advanced Process Monitoring, Measurement, and Control." In IMTC/03, Proceedings of the 20th IEEE Instrumentation and Measurement Technology Conference, 2, 1288-1293. Piscataway, New Jersey:I E E E. PNNL-SA-38389.

2002

  • Bamberger J.A., and M.S. Greenwood. 2002. "USING ULTRASONIC SIGNAL REFLECTION TO CHARACTERIZE THE DENSITY AND VISCOSITY OF FLUIDS AND SLURRIES." In ASME 2002 International Mechanical Engineering Congress and Exposition. Fluids Engineering. November 17-22, 2002, New Orleans, Louisiana, edited by 331-335; Paper No. IMECE2002-32238. New York, New York:ASME. PNNL-SA-36868. doi:10.1115/IMECE2002-32238
  • Greenwood M.S., and J.A. Bamberger. 2002. "Measurement of viscosity and shear wave velocity of a liquid or slurry for on-line process control." Ultrasonics 39, no. 9:623-630. PNNL-SA-34854.
  • Greenwood M.S., and J.A. Bamberger. 2002. "Self-Calibrating Sensor for Measuring Density Through Stainless Steel Pipeline Wall." In ASME 2002 International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana, 15-18; Paper No. IMECE2002-39693. New York, New York:ASME. PNNL-SA-37341. doi:10.1115/IMECE2002-39693

2001

  • Pappas R.A., J.A. Bamberger, L.J. Bond, M.S. Greenwood, P.D. Panetta, and D.M. Pfund. 2001. "Ultrasonic Methods for Characterization of Liquids and Slurries." In Conference Proceedings, IEEE Ultrasonics Symposium. 7-10 Oct. 2001, 1, 563-566. Piscataway, New Jersey:Institution of Electrical and Electronics Engineers. PNNL-SA-37084.

2000

1999

  • Greenwood M.S., J.R. Skorpik, J.A. Bamberger, and R.V. Harris. 1999. "On-line ultrasonic density sensor for process control of liquids and slurries." Ultrasonics 37, no. 2:159-171. PNNL-SA-30279.
  • Veltkamp D.J., S.D. Doherty, B.B. Anderson, M. Koch, L.J. Bond, L.W. Burgess, and A.H. Ullman, et al. 1999. "Process Analytical Chemistry." Analytical Chemistry 73, no. 12:121R-180R. PNNL-SA-34517.

Energy and Environment

Core Research Areas

Contacts