Skip to Main Content U.S. Department of Energy
Energy and Environment Directorate

Lei Li

Pacific Northwest National Laboratory
PO Box 999
Richland, WA 99352
(509) 375-5687

PNNL Publications

2023

  • Balusu K., L. Li, K. Choi, and A. Soulami. 2023. "COUPLING SMOOTHED PARTICLE HYDRODYNAMICS WITH FINITE ELEMENT METHOD TO SIMULATE RESIDUAL STRESSES FROM FRICTION STIR PROCESSING." In ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE 2022), October 30-November 3, 2022, Columbus, OH,, IMECE2022-93695, V009T12A040. New York, New York:ASME. PNNL-SA-173252. doi:10.1115/IMECE2022-93695
  • Das H., X. Li, L. Li, B.J. Schuessler, N.R. Overman, J.T. Darsell, and P. Upadhyay, et al. 2023. "An innovative and alternative approach toward gear fabrication." Journal of Manufacturing Processes 102. PNNL-SA-184447. doi:10.1016/j.jmapro.2023.07.050
  • Escobar J.D., B.S. Taysom, G.J. Grant, S.A. Whalen, A. Soulami, and L. Li. 2023. Sensing and Control During Bulk SPP. PNNL-34995. Richland, WA: Pacific Northwest National Laboratory. Sensing and Control During Bulk SPP
  • Escobar J.D., J.A. Silverstein, F. Ishrak, L. Li, A. Soulami, S. Li, and A. Yu, et al. 2023. "Microstructural evolution in shear-punch tests: A comparative study of pure Cu and Cu-Cr alloy." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing 886. PNNL-SA-189843. doi:10.1016/j.msea.2023.145715
  • Frazier W.E., L. Li, K. Choi, Y. Fu, Z. Xu, V.V. Joshi, and A. Soulami. 2023. "Microstructure-process relationships in monolithic U-10Mo fuel foil single-pass rolling: A parametric simulation study." Journal of Nuclear Materials 576, no. 17:Art. NO. 154271. PNNL-SA-170389. doi:10.1016/j.jnucmat.2023.154271
  • Srivastava A., H. Das, D. Ramirez Tamayo, L. Li, M. Pole, B. Gwalani, and A. Soulami, et al. 2023. "Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel." International Journal of Advanced Manufacturing Technology 128, no. 7-8:2899-2911. PNNL-SA-180851. doi:10.1007/s00170-023-12111-8

2022

  • Fu Y., W.E. Frazier, K. Choi, L. Li, Z. Xu, V.V. Joshi, and A. Soulami. 2022. "Prediction of Grain Structure after Thermomechanical Processing of U-10Mo Alloy using Sensitivity Analysis and Machine Learning Surrogate Model." Scientific Reports 12. PNNL-SA-170738. doi:10.1038/s41598-022-14731-8
  • Gwalani B., Q. Pang, A. Yu, W. Fu, L. Li, M. Pole, and C.J. Roach, et al. 2022. "Extended Shear Deformation of the Immiscible Cu-Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties." ACS Omega 7, no. 16:13721-13736. PNNL-SA-169151. doi:10.1021/acsomega.1c07368
  • Li L., A.A. Fortier, D. Ramirez Tamayo, V.V. Joshi, and A. Soulami. 2022. "Minimizing thickness variation in monolithic U-10Mo fuel foil and Zr interlayer during hot rolling: A microstructure-based finite element method analysis." Materials Today Communications 32. PNNL-SA-168343. doi:10.1016/j.mtcomm.2022.103910
  • Li L., M. Reza E Rabby, N.R. Overman, T. Wang, S.A. Whalen, G.J. Grant, and S.N. Mathaudhu, et al. 2022. "Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method." Materials & Design 221. PNNL-SA-173428. doi:10.1016/j.matdes.2022.111010
  • Li S., L. Li, A. Soulami, C.A. Powell, S. Mathaudhu, A. Devaraj, and C. Wang. 2022. "In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending." Materials Research Letters 10, no. 7:488-495. PNNL-SA-169389. doi:10.1080/21663831.2022.2057201

2021

  • Li L., V. Gupta, X. Li, A.P. Reynolds, G.J. Grant, and A. Soulami. 2021. "Meshfree Simulation and Experimental Validation of Extreme Thermomechanical Conditions in Friction Stir Extrusion." Computational Particle Mechanics 8, no. 2021:1-21. PNNL-SA-159353. doi:10.1007/s40571-021-00445-7
  • Li S., M.J. Olszta, L. Li, B. Gwalani, A. Soulami, C.A. Powell, and S. Mathaudhu, et al. 2021. "In-situ TEM Observation of Shear Induced Microstructure Evolution in Cu-Nb Alloy." Scripta Materialia 205, no. 2021:114214. PNNL-SA-165104. doi:10.1016/j.scriptamat.2021.114214
  • Wang T., L. Li, M. Pallaka, H. Das, S.A. Whalen, A. Soulami, and P. Upadhyay, et al. 2021. "Mechanical and microstructural characterization of AZ31 magnesium-carbon fiber reinforced polymer joint obtained by friction stir interlocking technique." Materials & Design 198. PNNL-SA-150263. doi:10.1016/j.matdes.2020.109305

2020

  • Gwalani B., M.J. Olszta, S. Varma, L. Li, A. Soulami, E.J. Kautz, and S. Pathak, et al. 2020. "Extreme Shear-Deformation-Induced Modification of Defect Structures and Hierarchical Microstructure in an Al-Si Alloy." Communications Materials 1. PNNL-SA-153669. doi:10.1038/s43246-020-00087-x
  • Wang T., P. Upadhyay, M. Reza E Rabby, X. Li, L. Li, A. Soulami, and K.S. Kappagantula, et al. 2020. "Joining of Thermoset Carbon Fiber Reinforced Polymer and AZ31 Magnesium Alloy Sheet Via Friction Stir Interlocking." International Journal of Advanced Manufacturing Technology 109, no. 3-4:689-698. PNNL-SA-149338. doi:10.1007/s00170-020-05717-9

Energy and Environment

Core Research Areas

Contacts